期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

基于正交切削的有限元仿真建模技术 被引量：1

Study on Orthogonal-cutting-based FEM Simulation Modeling Technology
下载PDF
导出
摘要 利用Deform2D有限元分析软件建立了金属正交切削过程的仿真模型。通过正交切削试验,对仿真结果进行了验证和比较,并分析了摩擦系数对仿真结果中切屑形状、切削力等的影响。 The simulation model of metal orthogonal cutting process was established by means of finite element software Deform2D.Through an orthogonal cutting experiment,the simulation results were validated and compared with experimental results,and the impacts of friction factor on simulation results such as chip figure,cutting force,etc were analyzed.
作者 陈文琳 李伟 刘宁
机构地区 合肥工业大学材料科学与工程学院 合肥工业大学
出处 《工具技术》 北大核心 2007年第6期51-54,共4页 Tool Engineering
基金 安徽省自然科学基金资助项目(项目编号:01044107)
关键词 有限元法 仿真 正交切削 建模 摩擦系数 Deform2D FEM simulation orthogonal cutting modeling friction factor Deform2D
分类号 TG506 [金属学及工艺—金属切削加工及机床]
  • 相关文献

参考文献4

  • 1[1]Halil Bil,S Engin Kilic,A Erman Tekkaya.A comparison of oxthogonal cutting data from experiments with three different finite element models.International Journal of Machine Tools & Manufacture,2004,44:933～944
  • 2沙智华,葛研军,赵亮,张生芳.切削加工仿真建模技术研究[J].系统仿真学报,2005,17(4):789-792. 被引量：13
  • 3[4]F Klocke,S Hoppe.Simulation of the metal cutting process-reliability and optimization.International Journal of Production Engineering and Computers,2003(4):43～52
  • 4[5]H Bil.Simulation of orthogonal metal cutting by finite element analysis.MSc.Thesis,Mechanical Engineering Department of Middle East Technical University,Ankara,Turkey,2003

二级参考文献14

  • 1李振加.切屑折断过程研究[M].北京:机械工业出版社,1997..
  • 2S Lei, Y C Shin, F P Incropera. Thermo-mechanical Modeling of Orthogonal Machining Process by Finite Element Analysis [J]. International Journal of Machine Tools & Manufacture, 1999, 39(5): 731-750.
  • 3Chandrasekaran Nagasubramaniyan. Molecular Dynamics Simulations of Machining, Materials Testing and Tribology at the Atomic Scale [D]. [PhD Dissertation of Oklahoma State University], Feb. 2002.
  • 4S Shimada, N Ikawa, H Tanaka, G Ohmori, J Uchikoshi, H Yoshinaga. Feasibility Study on Ultimate Accuracy in Micro-cutting Using Molecular Dynamics Simulation [J]. Annals of CIRP, 1993, 42(1): 91-94.
  • 5中山一雄.李云芳译.金属切削加工理论[M].北京: 机械工业出版社,1985..
  • 6C Y Jiang, Y Z Zhang, Z J Chi. Experimental Research of the Chip Flow Direction and its Application to the Chip Control [J]. Annals of the CIRP, 1984, 33(1): 81-84.
  • 7Maity KP, Das NS. A Class of Slipline Field Solutions for Metal Machining with Slipping and Sticking Contact at the Chip-tool Interface [J]. International Journal of Mechanical Sciences, 2001, 43(10): 2435-2452.
  • 8A Kharkevich, Patri K Venuvinod. Basic Geometric Analysis of 3-D Chip Forms in Metal Cutting. Part 1: Determining Up-curl and Side-curl Radii [J]. International Journal of Machine Tools & Manufacture, 1999, 39(5): 751-769.
  • 9Leonid Chuzhoy. Microstructure-level Machining Modeling of Ferrous Alloys [D]. [PhD Dissertation of University of Illinois at Urbana-Champaign], 2001.
  • 10Z C Lin, S P Lo. Ultra-precision Orthogonal Cutting Simulation for Oxygen-free-high-conductivity Copper [J]. Journal of Materials Processing Technology, 1997, 65(1-3): 281-291.

共引文献12

同被引文献4

引证文献1

工具技术
2007年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部