摘要
测量了20号冷轧钢在不同拉应力作用后,试件端点表面磁感应强度随拉应力的变化关系曲线,并对端点表面剩余磁感应强度和矫顽力随拉应力的关系进行了分析。当外作用拉应力小于试件的拉伸屈服点应力时,残余应力对端点表面剩余磁感应强度和矫顽力的影响很小;当外拉应力大于试件的屈服点应力时,端点表面剩余磁感应强度和矫顽力将急剧增加发生跃变。以此可以利用端点表面剩余磁感应强度和矫顽力在屈服点发生突变的性质对材料所受的应力状况进行探测,能够对试件负载是否已超出屈服点作出有效判断,为磁性检测方法的研究提供了新的思路。
The relationships of magnetization of end surface with different stresses of 20 cold rolled steel items were measured and residual magnetization of end surface and coercive force with different stresses were analyzed. It was indicated that when stresses were smaller than bend point of materials, residual magnetization of end surface and coercive force of materials produced by the fatigues and residual stresses for different stresses almost remained constant. However, when stresses were greater than bend poi...
出处
《无损检测》
北大核心
2008年第3期171-173,共3页
Nondestructive Testing
基金
航空科学基金资助项目(06ZF56009)
无损检测技术教育部重点试验室基金资助项目(ZD200629001)
南昌航院科研基金资助项目(EA200508146)
关键词
无损检测
应力集中
磁学特征
铁磁试件
冷轧钢
Nondestructive testing
Stress concentration
Magnetic characteristic
Ferromagnetic items
Cold rolled steel