基于ARM的LCD模块接口设计及MiniGUI实现

LCD module interface designing and miniGUI implementing based on ARM

设计了ARM9芯片S3C2410X与TFT型LCD模块TD035STEB1接口的硬件电路,基于嵌入式Linux操作系统进行了LCD模块驱动程序的开发、输入引擎的移植以及MiniGUI的交叉编译,针对具体的目标板成功实现了功能强大的嵌入式图形用户界面MiniGUI。实验表明,该设计模式通用性好、可移植性强、易于开发,为各种嵌入式系统实现友好人机交互接口提供了一套完整的硬、软件解决方案。

Hardware interface circuits between ARM9 chip S3C2410X and TFT-LCD module TD035STEB1 are designed.Device drivers of LCD module are developed,input engine is transplanted and MiniGUI is cross-compiled based on embedded Linux OS.Powerful embedded GUI MiniGUI is implemented on the concrete target board successfully.The experiment results indicate that this design pattern can be universally used,well transplanted,easily developed and it provide an integrated hardware and software solution to implement friendly ...