期刊文献+

某办公楼加层改造设计

Structural adding storeys and reconstruction design of an office building
下载PDF
导出
摘要 某办公楼原为20世纪80年代初兴建的5层钢筋混凝土框架结构,受业主委托,在不能对基础作加固处理的前提下,将原5层办公楼改造为12层的高层办公楼.设计将3层楼面以上部分全部拆除,保留3层楼面以下结构,并对3层楼面以下框架柱、梁采取加固改造措施.采用钢结构在3层楼面以上加建10层,并在3~4层做了钢结构支撑转换层,将下部6 m柱网转换成上部钢结构4 m柱网,完全满足了业主的特殊要求. The office building is originally a 5-storey reinforced concrete frame structure which is constructed at the beginning of 1980 s. According to the requirement of the owner,under the premise of not making any reinforcement processing to the foundation,the original 5-storey office building will be reconstructed to a 12-storey high-level office building.Demolishing 3 floors above,retaining the structure of 3 floors below,reinforces 3 floors below.Then using the steel structure to extend 10 storeys above 3 floo...
作者 李治
出处 《武汉大学学报(工学版)》 CAS CSCD 北大核心 2007年第S1期395-399,共5页 Engineering Journal of Wuhan University
关键词 结构检测 外包式柱脚 全截面湿式外包钢加固 钢结构支撑转换层 structure examination column foot total cross-section wet steel reinforcement steel brace transform storey
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部