期刊文献+

受流条件下碳碳复合材料的摩擦学特性研究 被引量:2

Research on Tribology Characteristic of C/C Composite under the Condition of Current Receiving
下载PDF
导出
摘要 以碳碳复合材料和铬青铜作为配副,研究了受流条件下碳碳复合材料的摩擦学特性。结果表明:速度、载荷和电流是影响受流条件下碳碳复合材料摩擦学特性的重要因素。在电流一定的条件下,碳碳复合材料的摩擦因数和磨损率随速度的增大而增大;摩擦因数随载荷的增加而增大,而磨损率随载荷的增加而减小。在载荷一定条件下,随着电流的增加,碳碳复合材料的摩擦因数减小而磨损率增大。与一般条件下的摩擦学特性相比较,碳碳复合材料在受流条件下的摩擦因数明显降低,而磨损率却明显提高。 Using C/C composite and chrome bronze as a couple,the tribological characteristic of C/C composite was studied under the condition of current-receiving.The result shows that speed,load and current are important factors to influence the tribological characteristic of C/C composite.The friction coefficient and wear rate increases with the increase of speed at fixed current.The friction coefficient increases but the wear rate decreases with the increase of load.The friction coefficient decreases but the wear r...
出处 《润滑与密封》 CAS CSCD 北大核心 2008年第4期12-14,共3页 Lubrication Engineering
基金 国家自然科学基金重点项目(50432020) 国家973项目(2007CB607603) 国家自然科学基金项目(50775066)
关键词 受流 碳碳复合材料 摩擦学特性 摩擦因数 磨损率 current-receiving C/C composite tribological characteristic friction coefficient wear rate
  • 相关文献

参考文献4

  • 1虞澜.金-稀土合金电刷丝的磨损机理研究[J].摩擦学学报,2002,22(4):282-285. 被引量:14
  • 2[2]Shunichi Kubo,Koji Kato.Effect of arc discharge on wear rate of Cu-impregnated carbon strip in unlubricated sliding against Cu trolley under electric current[J].Wear,1998,216:172-178.
  • 3[3]Hiroki Nagasawa,Koiji Kato.Wear mechanism of copper alloy wire sliding against iron-base strip under electric current[J].Wear,1998,216:179-183.
  • 4[4]Da Hai He,Rafael Manory,Norm Grady.Wear of railway contact wires against current collector materials[J].Wear,1998,215:146-155.

二级参考文献7

共引文献13

同被引文献25

  • 1余明,张宝生,屈树岭.电力机车用新型碳基滑板材料的研制[J].机械工程材料,1995,19(2):32-34. 被引量:7
  • 2张晓娟,孙乐民.受电弓滑板和接触网导线材料的现状及展望[J].河南科技大学学报(自然科学版),2006,27(6):4-7. 被引量:10
  • 3冉旭,刘勇兵,安健.放电等离子快速烧结C/Cu复合材料的组织和摩擦磨损特性研究[J].摩擦学学报,2007,27(1):11-15. 被引量:5
  • 4赵飞.高速列车受电弓滑板新材料展望[J].湖南有色金属,2007,23(4):35-38. 被引量:9
  • 5Edie D D. The effect of processing on the structure and properties of carbon fibers [J]. Carbon, 1998, 36(4) : 345 - 362.
  • 6Simon Dorfman, David Fuksb. Stability of copper segregations on copper/carbon metal - matrix composite interfaces under alloying[ J]. Composites Science and Technology, 1997, (57) : 1 065-1 069.
  • 7Schranka C, Schwarz B, Eisenmenger - Sittner C, et al. Inuence of thermal treatment on the adhesion of copper coatings on carbon substrates[J]. Vacuum, 2005, (80) : 122 - 127.
  • 8Rambo C R, Travitzky N, Zimmermann K, et al. Synthesis of TiC/Ti - Cu composites by pressureless reactive infiltration of TiCu alloy into carbon preforms fabricated by 3D- printing[ J]. Materials Letters, 2005, (59) : 1 028 - 1 031.
  • 9Shunichi Kubo, Koji Kato. Effect of arc discharge on wear rate of Cu- impregnated carbon strip in unlubricated sliding against Cu trolley under electric current [ J ]. Wear, 1998, (216) : 172 - 178.
  • 10Liu L, Li W Mi, Tang Y P, et al. Friction and wear properties of short carbon fiber reinforced aluminum matrix composites [ J ].Wear, 2009, (266) : 733 -738.

引证文献2

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部