期刊文献+

等离子体喷涂纳米结构YPSZ涂层腐蚀行为研究 被引量:1

Corrosion Characteristics of Plasma-sprayed Nanostructure YPSZ Coating
下载PDF
导出
摘要 研究采用等离子体喷涂制备纳米结构YPSZ涂层。通过X射线衍射分析、扫描电子显微镜对纳米结构YPSZ涂层的耐腐蚀性与涂层的微观组织结构的关系进行研究。结果表明:由于涂层孔隙尺寸的降低,孔隙率的增大使纳米结构YPSZ涂层的耐盐腐蚀性能降低,耐高温腐蚀性能提高。纳米结构涂层经过盐腐蚀或高温腐蚀后纳米晶粒明显长大,并出现微小的晶格变化及相转变现象。 Nanostructure YPSZ coating was fabricated by plasma spraying technology. The coating composition was analyzed by IR-FT and XRD. The coating structure and porosity were observed by SEM. The corrosion resistance of ceramic coating was examined by salt immersion and high temperature oxygen experiments. The results show that the corrosion resistance of the coating is decreased because of the increase of porosity,and the property of high temperature oxygen is improved. After salt and high temperature corrosion,the growth of Nanostructure crystalline size and phase transformation are observed.
出处 《中国表面工程》 EI CAS CSCD 2006年第z1期178-181,共4页 China Surface Engineering
基金 北京矿冶研究总院科研基金 教育部重点实验室创新基金资助。
关键词 等离子体喷涂 纳米结构 腐蚀行为 YPSZ 涂层 plasma spraying nanostructure corrosion behavior YPSZ coating
  • 相关文献

参考文献13

  • 1[1]Chen X,Evans A G,Hutchinson J W.Simulation of the high temperature impression of thermal barrier coatings with columnar microstructure[J].Acta Materialia,2004,52:567-571
  • 2[2]Lee C H.Phase transformation and bond coat oxidation behavior of plasma sprayed zirconia thermal barrier coating[J].Surface and Coatings Technology,2000,124:1-12
  • 3[3]Gell M.Applying nanostructured materials to future gas turbine engines,JOM,1994,8:30-34
  • 4管恒荣,李美姮,孙晓峰,张重远,金涛,赵乃仁,胡壮麒,胡望宇,宫声凯.高温合金热障涂层的氧化和失效研究[J].金属学报,2002,38(11):1133-1140. 被引量:44
  • 5[5]Jordan E H.Fabrication and evaluation of plasma sprayed nanostructured alumina/titania coatings with superior properties[J].Materials Science and Engineering A,2001,301:80-89
  • 6[6]Lima R S,Kucuk A,Berndt C C.Integrity of nanostructured partially stabilized zirconia after plasma spray processing[J].Materials Science and Engineering A,2001,313:75-82
  • 7[7]Watonabe M,Mercer C,Levi C G,et al.A probe for the high temperature deformation of thermal barrier oxides[J].Acta Materialia,2004,52:1479-1487
  • 8[8]Cao X Q,Vassen R,Stoever D.Ceramic materials for thermal barrier coatings[J].Journal of the European Ceramic Society,2004,24:1-10
  • 9[9]Gell M.Application opportunities for nanostructured materials and coatings[J].Materials Science and Engineering A,1995,204:246-251
  • 10林锋,于月光,蒋显亮,曾克里,任先京,李振铎.YPSZ纳米结构热喷涂粉末材料工艺优化研究[J].材料科学与工程学报,2006,24(1):66-69. 被引量:3

二级参考文献48

  • 1楼翰一,唐幼军,孙晓峰,管恒荣.K17F高温合金溅射微晶层的抗高温氧化行为[J].金属学报,1994,30(3). 被引量:13
  • 2A. Kribus.Theoretical and Practical Progress of New Heliostat by Chen et al.[J].Communications in Theoretical Physics,2006,45(1):163-164. 被引量:55
  • 3Gell M.Application opportunities for nanostrucutred materials and coatings[J].Materials Science and Engineering A,1995,204:246-251.
  • 4Gell M.Applying nanostructured materials to future gas turbine engines[J].JOM,1994,8:30-34.
  • 5Chen X,Evans A G,Hutchinson J W.Simulation of the high temperature impression of thermal barrier coatings with columnar microstructure[J].Acta Materialia,2004,52(3):567-571.
  • 6Watonabe M,Mercer C,Levi C G,et al.A probe for the high temperature deformation of thermal barrier oxides[J].Acta Materialia,2004,52:1479-1487.
  • 7Schlichting K W,Padture N P,Jordan E H,et al.Failure modes in plasma sprayed thermal barrier coatings[J].Materials Science and Engineering A,2003,342:120-130.
  • 8Shaw L L,Goberman D,Ren R,et al.The Dependency of Microstructure and Properties of Nanostructured Coatings on Plasma Spray Conditions[J].Surface and Coatings Technology,2000,130:1-8.
  • 9Lima R S,Kucuk A,Berndt C C.Evaluation of microhardness and elastic modulus of thermally sprayed nanostructured zirconia coatings[J].Surface and Coatings Technology,2001,135:166-172.
  • 10Chen X,Wang R,Yao N,et al.Foreign object damage in a thermal barrier system:mechanism and simulations[J].Materials Science and Engineering A,2003,325(1-2):221-231.

共引文献78

同被引文献13

  • 1花国然,罗新华,黄因慧,赵剑峰,田宗军,王蕾,张永康.激光重熔改性等离子喷涂陶瓷涂层的组织及其耐腐蚀性能[J].中国有色金属学报,2004,14(6):934-938. 被引量:35
  • 2Gurrappa.. I. , Sambasiva Rao. A.. Thermal barrier coatings for enhanced efficiency of gas turbine engines [ J ]. Surface & Coatings Teclmology, 2006, 201 (6) : 3016 - 3029.
  • 3Jones, R. L.. Some aspects of the hot corrosion of thermal barrier coatings [ J ]. Journal of Thermal Spray Technology. 1997, 6(1) : 77 -84.
  • 4Batista. C. , Portinba, A. , Ribiro. R. et al. Evaluation of laser-glazed pLasma-sprayed thermal barrier coatings under high temperature exposure to molten salts [ J ]. Surface & Coatings Technology, 2006, 200 (24) : 6783 - 6791.
  • 5Yingxue Song, Chungen Zhou, Huibin Xu. Corrosion behavior of thermal barrier coatings exposed to NaCl plus water vapor at 1050 ℃ [J]. Thin Solid Films, 2008, 516 (16) : 5686 -5689.
  • 6Gang Zhang, Yong Liang, Yingna Wu et al. Laser remelting of plasma sprayed thermal barrier coatings [ J ]. Journal of Material Science & Technology, 2001, 17 ( $1 ) : 105 - 110.
  • 7Mifune. N. , Harada. Y. , Doi. T. et al, Hot corrosion behavior of graded thermal barrier coatings formed by plasma spraying process [ J ]. Journal of Thermal Spray Technology, 2004, 13(4): 561 -569.
  • 8Tsai. P. C., Lee. J, H.. Hsu, C. S.. Hot corrosion behavior of laser-glazed plasma-sprayed yttria-stabilized zircortia thermal barrier coatings in the presence of V2O5 [J]. Surface & Coatings Technology, 2007, 201 (9- 11 ) : 5143 -5147.
  • 9Abbas Afrasiabi, Mohsen Saremi, Akira Kobayashi. A comparative study on hot corrosion resistance of three types of thermal barrier coatings: YSZ, YSZ + Al2O3 and YSZ/ Al2O3[J]. Material Science and Engineering, 9008, 478 (1 -2) : 264 -269.
  • 10Yoshiba. M., Abe. K., Aranaml. T., Harada. Y.. High-temperature oxidation and hot corrosion behavior of two kinds of thermal barrier coatings systems for advanced gas turbines [ J ]. Journal of Thermal Spray Technology, 1976, 5(3) : 259 -268.

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部