奥钢联板坯连铸过程控制系统升级改造的研究
Study on the Upgrading of VAI Process Control and Automation System in Slab Caster
摘要
结合目前钢铁企业的实际情况,分析了对引进的奥钢联的板坯连铸过程控制系统进行升级、改造的必要性、可行性,及其技术难点.
出处
《冶金设备》
2006年第z1期15-17,4,共4页
Metallurgical Equipment
参考文献5
-
1张兴中.我国连续铸钢技术的发展状况和趋势[J].钢铁研究学报,2004,16(6):1-6. 被引量：19
-
2韩贵岩.板坯连铸过程控制的发展趋势[J].鞍钢技术,2003(6):12-14. 被引量：3
-
3[5]Madhuchhanda Bhattacharya.A fixed-grid finite element based enthalpy formulation for generalized phase chang problems:role of superficial mushy region.International Journal of Heat and Mass Transfer,2002,45:4881-4898
-
4[6]M.E.Honnor,A.J.Davies.Nonlinear transient field problems with phase change using the boundary element method.Engineering Analysis with Boundary Elements,2004,28:561-570
-
5[7]M.EL-BEALY.Monotonic and fluctuated cooling approaches in secondary cooling zones during continuous casting.Canadian Matallergical Quarterly,1997,Vol.36 (1):49 -56
二级参考文献13
-
1刘明延.板坯连铸机设计与计算[M].机械工业出版社,1990..
-
2Gerhard Bocher, Uwe Hoffmann. Operational Experience witha Resonance Mould with Hydraulic Drive Used in Slab Casting[J]. MPT International,1995,(5):52-58.
-
3Takeuchi E, Brimacombe J K. The Formation of OscillationMarks in the Continuous Casting of Steel Slab [J]. Metallurgi-cal and Materials Transactions,1984,15B:493-509.
-
4Brendzy J L, Bakshi I A, Samarasekera I V, et al. Mould-Strand Interaction in Continuous Casting of Steel Billets Part 2Lubrication and Oscillation Mark Formation [J]. Ironmakingand Steelmaking,1993,20(1):63-74.
-
5Yang H L, Zhao L G. Mathematical Simulation on CoupledFlow, Heat and Solute Transport in Slab Continuous CastingProcess [J]. Metallurgical and Materials Transactions,1998,29B(6):1345-1356.
-
6Stefano Barozzi, Plerglorglo Fontana, Pasqualino pragliola.Computer Control and Optimization of Secondary Cooling dur-ing Continuous Casting [J]. Iron and Steel Engineer,1986,16(11):21-26.
-
7Klaus Schwerdtfeger, Benefits. Challenges and Limits in NewRoutes for Hot Strip Production [J]. ISIJ International,1998,38(8):852-861.
-
8Alzetta F, Andreatta D, Tonidandel M, et al. The ''Luna''Endless Casting and Rolling Minimill for Specialty Steel Bars[J]. MPT International,2001,(1):72-82.
-
9Yamanaka A, Kumakura S, Okamura K. Thin Slab Castingwith Liquid Core Reduction [J]. Ironmaking and Steelmak-ing,1999,26(6):457-462.
-
10Won Y M, Kim K H , Yeo T J, et al. Effect of Cooling Rateon ZST, LIT and ZDT of Carbon Steels Near Melting Point[J]. ISIJ International,1998,38(10):1093-1099.
共引文献18
-
1张建立,王长松,樊厉,姚耕耘,薛建国,裴红星.奥钢联板坯连铸过程控制系统升级改造的研究[J].冶金能源,2006,25(2):55-58. 被引量：5
-
2张成元,郑林.我国连铸技术的发展[J].山西冶金,2007,30(2):14-17. 被引量：2
-
3张成元,郑林.连铸技术的发展与思考[J].江苏冶金,2007,35(2):5-8. 被引量：11
-
4王锋,田乃媛,贺东风,徐安军.连铸机开浇前备包现象的讨论[J].钢铁,2008,43(3):41-43. 被引量：8
-
5冯明杰,王恩刚,战国锋,姜在伟,赫冀成.W9高速钢的电磁连续铸造研究[J].钢铁,2008,43(10):25-28. 被引量：3
-
6毕彦雷,张树江,张彩军.薄板坯连铸结晶器钢液流动数值模拟[J].河南冶金,2011,19(2):21-23. 被引量：1
-
7高爱民,张燕,张彩军.中薄板坯结晶器内钢液流动数值模拟[J].河北联合大学学报（自然科学版）,2012,34(2):23-27. 被引量：1
-
8张会.液态模锻工艺的发展和应用[J].机械管理开发,2012,27(2):71-71.
-
9史学亮,任廷志,秦旭.非稳态浇注压下区间变化规律的研究与应用[J].中国机械工程,2013,24(21):2960-2966. 被引量：3
-
10彭少辉.大型数据中心灾备技术探讨[J].华南金融电脑,2002,10(7):47-48. 被引量：1
-
1张建立,王长松,樊厉,姚耕耘,薛建国,裴红星.奥钢联板坯连铸过程控制系统升级改造的研究[J].冶金能源,2006,25(2):55-58. 被引量：5
-
2周雅丽.宣钢第一炼铁厂2#高炉计算机控制系统升级改造成效显著[J].冶金自动化,2005,29(4):68-69.
-
3孙长顺,张成杰,张卫东.1^# 高炉计算机自动控制系统升级改造[J].包钢科技,2002,28(1):40-42.
-
4彭文军,钟宏平.取料机智能润滑系统升级改造[J].冶金设备管理与维修,2011,29(2):25-25.
-
5裴红星,王长松,张玉宝,曹军民,金学伟.板坯连铸二冷控制系统升级改造的研究[J].炼钢,2009,25(3):74-77. 被引量：1
-
6太钢不锈钢公司计划生产不锈钢310万吨[J].中国金属通报,2012(18):9-9.
-
7王婧.莱钢4号连铸机自控系统完成改造[J].山东冶金,2010,32(5):34-34.
-
8孙铁良.炼钢工序3#方坯连铸机电磁搅拌低频电源系统升级改造方案[J].酒钢科技,2012,0(3):252-258.
-
9李艳文.通道式废钢铁辐射监测系统升级改造[J].柳钢科技,2016,0(6):29-30.
-
10胡占营,曹永峰.内蒙古某公司330kA铝电解槽系列节能降耗的生产实践[J].轻金属,2016(3):18-22.
