摘要
利用正交试验法研究了搅拌摩擦焊工艺参数对LY12铝合金接头组织和力学性能的影响。结果表明:搅拌头轴肩直径对接头抗拉强度的影响大于搅拌头旋转速度和焊接速度对接头强度的影响;当焊接工艺参数匹配合理时,接头热输入量适当,焊核晶粒组织为细小均匀的等轴晶,接头抗拉强度大于350 MPa,接头强度系数高达86%。
Effects of friction stir welding(FSW) process parameters on microstructure and mechanical properties of the LY12 aluminum alloy joint were investigated with orthogonal experiments.The results show that the shoulder diameter of the stirrer has greater effect on the tensile strength of the joint than rotation speed and weld speed.When the welding parameters are proper,the heat input could be optimized,the microstructure of weld nugget consist of almost fine equiaxed grains,tensile strength of the joint is hig...
出处
《机械工程材料》
CAS
CSCD
北大核心
2008年第6期22-24,共3页
Materials For Mechanical Engineering
基金
江西省自然科学基金资助项目(0450090)
关键词
搅拌摩擦焊
接头强度
显微组织
正交试验
friction stir welding
joint strength
microstructure
orthogonal experiment
