直接挤压铸造镁合金轴筒件的研究
Experimental Investigation on the Direct Squeeze casting of Magnesium Alloy Beam-barrel Parts
摘要
根据镁合金轴筒铸件厚壁简单的特点及较高的强韧性要求,制订了挤压铸造试验研究方案.设计了可在普通液压机上使用的挤压铸造模具,制得了可热处理的挤压铸造轴筒铸件.通过固溶处理与人工时效处理,提高了铸件的强度与塑性.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2005年第z1期184-186,共3页
Special Casting & Nonferrous Alloys
基金
国家高科技发展计划(863计划)项目(2002AA336080),国家973计划项目(G2000067302)
参考文献5
-
1张丁非,彭建,丁培道,潘复生.镁及镁合金的资源、应用及其发展现状[J].材料导报,2004,18(4):72-76. 被引量:60
-
2唐靖林,曾大本,常安国.挤压铸造的发展和应用现状[J].中国铸造装备与技术,1998,33(3):3-6. 被引量:10
-
3肖泽辉,罗吉荣,吴树森,李东南,毛有武,宋象军.镁合金挤压铸造成形的研究[J].铸造,2003,52(9):672-674. 被引量:10
-
4[4]Ha, How U. Squeeze Casting of Magnesium-based Alloys and their Metal Matrix Composites. (United Kingdom), University of Southampton, 1988.
-
5[5]Kleiner S, Beffort O, Wahlen A et al. Uggowitzer. Microstructure and Mechanical Properties of Squeeze Cast and Semi-solid Cast Mg-Al Alloys. Journal of Light Metals,2002(2) :277 ~ 280
二级参考文献36
-
1乐启炽,崔建忠.Mg-Li合金的过去、现在与将来[J].宇航材料工艺,1997,27(2):1-6. 被引量:35
-
2罗守靖 何绍元.钢质液态模锻[M].哈尔滨:哈尔滨工业大学出版社,1990..
-
3Deker R F. The renaissance in magnesium [J].Advanced Materials & Process, 1998, 98:31~33.
-
4Sequeira W P, Murray M T, Dunlop, et al. Effect of section thickness and gate velocity on the microstructure and mechanical properties of high pressure die cast magnesium alloy AZ91D[J].Automotive Alloys, 1997: 169~183.
-
5K.H.马图哈 丁道云(译).非铁合金的结构与性能[M].北京:科学出版社,1999..
-
6Comstock H B. Magnesium and magnesium compounds-A material survey. U.S. Bureau of Mines Information Circular, 1963:128
-
7Avedesian M M, Baker H. Magnesium and magnesium alloys-ASM Specialty Handbook. Ohio, USA: ASM International, 1999
-
8Bodenlos A J, Thayer T P. United States Mineral Resource, U.S. Geological Survey Professional Paper. 2001,820: 379
-
9Kramer D A. Magnesium, its Alloys and Compounds.U.S. Geological Survey Open-File Report 01-341,2002:5
-
10Burstow C. Magnesium-the impact of projected new supply on prices over the next five years. Annual World Magnesium Conference, 57th, Toronto, May 21-23, 2000, Proceeding, McLean, VA, International Magnesium Association:2000,11
共引文献77
-
1邹文兵,侯正全,李宝辉,肖旅,王宝兵,李利平,林初城.砂铸Mg-Gd-Y-Zr合金热处理工艺优化[J].航天制造技术,2011(6):15-18. 被引量:5
-
2潘复生,王敬丰,章宗和,丁培道.中国镁工业发展的机遇、挑战和责任[J].中国金属通报,2008,0(2):6-14. 被引量:21
-
3张丁非,彭建,丁培道,潘复生.关于我国镁合金产业发展战略的思考[J].世界有色金属,2004(7):4-7. 被引量:6
-
4张丁非,丁培道,潘复生,彭建.重庆镁合金研究与产业的发展现状与建议[J].材料导报,2004,18(8):89-92. 被引量:4
-
5陈亚军,黄天佑.镁合金应用现状及铸造技术研究进展[J].铜业工程,2005(1):45-49. 被引量:9
-
6王茂林,刘金海,李国禄,刘根生.镁合金(Ni-P)-SiC纳米颗粒化学复合镀层硬度及耐磨性的研究[J].化工机械,2005,32(4):199-202. 被引量:5
-
7赵鸿金,康永林,王朝辉,杜海亮.Mg-9.5Al-1.2Zn-0.3Mn镁合金变质精炼的实验研究[J].热加工工艺,2006,35(9):26-29.
-
8兰伟,孙建春,周安若,邱会东,张丁非.镁合金表面处理技术的研究现状[J].材料导报,2006,20(F05):428-430. 被引量:11
-
9张颂阳,耿茂鹏,谢水生,周新民,张莹,王艳春.镁合金成形技术研究进展[J].热加工工艺,2006,35(13):77-80. 被引量:7
-
10王茂林,刘金海,李国禄,刘根生,赵雪勃.镁合金化学复合镀(Ni-P)-SiC纳米颗粒[J].有色金属(冶炼部分),2007(1):34-37. 被引量:1
-
1赖国胜,钱娜,刘艳华.半固态流变挤压铸造研究现状[J].热加工工艺,2011,40(5):68-69. 被引量:14
-
2赵鸿金,康永林,王朝辉,刘津伟,杜海亮.镁合金轴筒件直接挤压铸造的研究[J].特种铸造及有色合金,2005,25(10):607-609. 被引量:6
-
3袁玉红,杜建平,李春龙,肖敏,阳鑫.凸轮轴轴承盖挤压铸造工艺及数值模拟研究[J].铸造技术,2015,36(3):697-700. 被引量:6
-
4王峰,李庆丰,段华伟,于宝义,于海朋.热处理对直接挤压铸造Al-5Cu合金力学性能和组织的影响[J].特种铸造及有色合金,2006,26(10):649-652.
-
5赵章焰,罗继相,陈云,徐军.汽车空调器动盘挤压铸造技术研究[J].特种铸造及有色合金,2012,32(4):334-337. 被引量:3
-
6齐丕骧.变形铝合金挤压铸造[J].特种铸造及有色合金,2008,28(S1). 被引量:1
-
7齐丕骧.变形铝合金挤压铸造[J].特种铸造及有色合金,2008,28(10):769-772. 被引量:35
-
8范建磊,郑成坤,罗宗强,张卫文.压力对铸造Al-Li-Cu合金组织和力学性能的影响[J].中国有色金属学报,2014,24(9):2307-2314. 被引量:5
-
9刘娉婷,罗继相,胡健民.高压齿轮泵体挤压铸造技术研究[J].特种铸造及有色合金,2007,27(2):118-120.
-
10刘筱,朱必武,李落星,蒋斌.基于数值模拟的铝合金汽车行李箱盖内板挤压铸造[J].铸造技术,2017,38(2):445-447. 被引量:6