Diamond-like carbon films synthesized on bearing steel surface by plasma immersion ion implantation and deposition
Diamond-like carbon films synthesized on bearing steel surface by plasma immersion ion implantation and deposition
摘要
Diamond-like carbon (DLC) films were synthesized by plasma immersion ion implantation and deposition (PIIID) on 9Cr18 bearing steel surface. Influences of working gas pressure and pulse width of the bias voltage on properties of the thin film were investigated. The chemical compositions of the as-deposited films were characterized by Raman spectroscopy. The micro-hardness, friction and wear behavior, corrosion resistance of the samples were evaluated, respectively. Compared with uncoated substrates, micro-hardness results reveal that the maximum is increased by 88.7%. In addition, the friction coefficient decreases to about 0.1, and the corrosion resistance of treated coupons surface are improved significantly.
出处
《中国有色金属学会会刊:英文版》
CSCD
2004年第z1期291-295,共5页
Transactions of Nonferrous Metals Society of China
参考文献15
-
1[1]Robertson J. Diamond-like carbon[J]. Materials Science and Engineering Rev, 2002. 129 - 131.
-
2[2]Aissenberg S, Chabot R. Ion-beam deposition of thin films of diamond-like carbon[J]. J Appl Phys, 1971,42(7): 2953.
-
3[3]Kudoyarova V K, Chernyshov A V, Zvonareva T K,et al. Study of diamond-like carbon films for protective coatings[J]. Surf Coat Technol, 1998, 100/101 (1 -3): 192- 195.
-
4[4]Baba K, Hatada R. Preparation and properties of metal containing diamond-like carbon films by magnetron plasma source ion implantation[J]. Surf Coat Technol,2002, 158-159: 373-376.
-
5[5]Sanchez N A, Rincon C, Zambrano G, et al. Characterization of diamond-like carbon thin films prepared by r.f. magnetron sputtering [J]. Thin Solid Films,2000, 373(1 -2): 247 -250.
-
6[6]Fung M K, Lai K H, Chan C Y. Mechanical properties and corrosion studies of amorphous carbon on magnetron disks prepared by ECR plasma technique[J]. Thin Solid Films, 2000, 368(2): 198 - 202.
-
7[7]DING Xing-zhao, ZHANG Fu-min, LIU Xiang-huai, et al. Ion beam assisted deposition of diamond-like nanocomposite films in an acetylene atmosphere[J]. Thin Solid Films, 1999, 346(1-2): 82-85.
-
8[8]Jung H S, Park H H, Pang S S, et al. The investigation of thermal effect on the properties of pulsed laser deposited diamond-like carbon films [J]. Thin Solid Films,1998, 332(1 - 2): 103 - 108.
-
9[9]Hamdi A H, Qiu X, Malaczynski G W, et al. Microstructure analysis of plasma immersion ion implanted diamond-like carbon coatings[J]. Surf Coat Technol,1998, 103-104: 395-400.
-
10[10]Hatada R, Baba K. Preparation of hydropbobic diamond-like carbon films by plasma source ion implantation[J]. Nucl Instrum Methods in Phys Resear B,1999, 148: 655.
-
1刘东平,刘艳红,陈宝祥.Surface Roughness of Various Diamond-Like Carbon Films[J].Plasma Science and Technology,2006,8(6):701-707.
-
2G.A. Liu , T.M. Wang , E.Q.STUDY OF RAY IRRADIATION ON DIAMOND-LIKE CARBON FILMS[J].Acta Metallurgica Sinica(English Letters),2002,15(1):26-32.
-
3王浪平,王小峰,汤宝寅.全方位离子注入与沉积技术及其工业机的研制[J].核技术,2007,30(12):983-986. 被引量：5
-
4王浪平,唐保茵,王小锋,王松岩.Effect of Yttrium Pre-Implantation on Implantation Behavior of Ti-6Al-4V Alloy in Nitrogen Plasma Immersion Ion Implantation[J].Journal of Rare Earths,2001,19(1):40-43.
-
5李兆光,张人佶,王浪平,彭俊斌,周刚.空间飞轮轴承DLC涂层表面改性的工艺研究[J].新技术新工艺,2010(8):101-104. 被引量：1
-
6M.P.Srinivasan,Santanu Bera and S.V.Narasimhan(Water and Steam Chemistry Laboratory, BARC Facilities, IGCAR CAMPUS, KALPAKKAM-603 102, Tamil Nadu, India)To whom correspondence should be addressed E-mail: kumbhar@igcar.ernet.in.Preparation and Characterization of Ni-Ferrite Coating on Carbon Steel Coupons[J].Journal of Materials Science & Technology,1999,15(5):473-477.
-
7张志伟,高平,王力杰,黄瑞芬.等离子体浸没离子注入与沉积技术在刀具上的应用研究[J].兵器材料科学与工程,2010,33(5):81-84.
-
8Wang Maoqiu(王毛球), Xie Changsheng(谢长生), Zeng Dawen(曾大文) School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, P. R. China.Cu+Al_2O_3 composite coating on AISI 1045 steel surface by laser cladding[J].中国有色金属学会会刊：英文版,1999,9(3):462-467.
-
9刘洪喜,蒋业华,詹兆麟,汤宝寅.PIIID复合强化处理轴承钢表面TiN膜层的XPS表征[J].光谱学与光谱分析,2009,29(9):2585-2589. 被引量：4
-
10王宇航,汤宝寅,王浪平,王晓峰,甘孔银,于永澔,刘洪喜,王松雁.GCr15轴承钢表面PIIID处理膜层膜基结合力的研究[J].真空科学与技术学报,2004,24(3):233-237. 被引量：4
