中间包和结晶器内流场控制-提高连铸质量的关键

下载PDF

导出

摘要本文被邀报道中间包和结晶器内流场控制的重要性以及对连铸坯质量的影响.描述了从钢包到中间包再到结晶器每一步的流场特征.对中间包和结晶器内理想流场做了简要描述.

作者 Yogeshwar Sahai

机构地区俄亥俄州大学

出处《钢铁》 CAS CSCD 北大核心 2004年第z1期32-36,共5页 Iron and Steel

关键词连铸流场中间包结晶器板坯流场控制

参考文献16

1[1]E. Julius, Stahl u. Eisen, 1987, 107, 397～402.
2[2]Wolf M., "Slab Caster Tundish Configuration and Operation - a Review", Proceedings Steelmaking Conference, 1996, 79, 367～381.
3[3]Murayama N. et al., "The Development of ‘H-shaped Tundish' Featuring a New Function of Simultaneous Pouring by Two Ladles", The Sixth International Iron and Steel Congress, 1990, vol. 3,424～431.
4[4]Tsai H.T., "AISI Survey of Slab Casters", Presentation at the AISI Technical Committee on MetallurgySteelmaking and Casting, Mexico, April 22～23, 1999.
5[5]Bolger D. and Saylor K., "Development of a Turbulence Inhibiting Pouring Pad / Flow Control Device for the Tundish", Proceedings Steelmaking Conference, 1994, 77, 225～233.
6[6]Uemura K. et al., "Filtration of Non-metallic Inclusions in Steel", The Sixth International Iron and Steel Congress, 1990, vol. 3, 535～542.
7[7]Yamanaka H. et al., Tetsu-to-Hagane, 1983, 69, S213.
8[8]Sahai Y. and Chakraborty S., "Importance of Thermal Modeling in Continuous Casting Tundishes",Proceedings Process Technology Division Conference, ISS, 1992, 10, 161～ 176.
9[9]Lowry M.L. and Sahai Y., "Thermal Effects on the Flow of Liquid Steel in Continuous Casting Tundishes", Ironmaker and Steelmaker, 1992, 19:3, 81～86.
10[10]Damle C.S. and Sahai Y., "Modeling of Grade Change Operations during Continuous Casting of Steel",Proceedings Steelmaking Conference, 1994, 77, 235～246.

1周宇涛,晏威,邦嘉文,周佳,邓叶群,贺道中.连铸中间包内流场控制优化水模实验研究[J].湖南工业大学学报,2016,30(4):48-52.
2刘金刚,颜慧成,刘浏,王新华.控流条件下中间包流场水模实验研究[J].钢铁,2004,39(z1):491-497.
3何金平,王春锋,王占武,钱龙,叶飞.CSP工艺生产集装箱钢漏钢原因分析及控制措施[J].炼钢,2014,30(4):20-24. 被引量：3
4程常桂,邓康.异钢全连铸技术的应用和发展[J].包头钢铁学院学报,1999,18(B09):401-406. 被引量：7
5胡礼刚,吴湧涛,李正东,邱春斌.连铸中间包流场控制优化[J].河南冶金,2014,22(5):33-36.
6刘鹏哲,刘峰,石磊磊.基于流场控制的结晶器电磁制动应用研究[J].无线互联科技,2013,10(9):116-116.
7周昊明,张华,倪红卫,陈光友,刘吉刚.柳钢板坯连铸结晶器流场优化[J].炼钢,2009,25(2):37-40. 被引量：2
8汪宇.电磁制动技术在连铸机中的应用[J].科技与企业,2013(15):302-302.
9钟云涛,潘汉玉,Nils Jacobson,Martin Seden.板坯结晶器流场控制的发展趋势[J].宝钢技术,2016,9(4):53-57. 被引量：7
10董辉,蔡九菊,王峰,刘国防.球团竖炉存在的主要问题及解决方案[J].钢铁研究学报,2005,17(5):7-10. 被引量：1

钢铁

2004年第z1期

内容加载中请稍等...