FTSC工艺薄板坯连铸SS400钢结晶器保护渣的研究与应用
被引量:3
摘要
本文通过对结晶器保护渣的理化性能的研究,提出了适合唐钢FTSC工艺薄板坯连铸机浇铸中碳钢SS400的保护渣的理化指标,并介绍了现场试验和铸坯质量等情况.
出处
《钢铁》
CAS
CSCD
北大核心
2004年第z1期479-481,共3页
Iron and Steel
参考文献3
-
1朱果灵等.薄板坯试验机结晶器用保护渣的开发[J].连铸,1993,(2):8-11.
-
2[4]蔡开科.浇注与凝固.北京:冶金工业出版社,1992.88.
-
3[5]Jenkins M S.Characterisation of Heat Transfer in a Continuous Casting Mold. Iron and Steel Society. Steelmaking Conference Proceedings. Nashville: The Iron and Steel Society Publishers, 1995.315 ~ 320.
同被引文献14
-
1王艺慈,董方,王宝峰.中碳钢薄板坯连铸结晶器保护渣固态渣膜结构的研究[J].包头钢铁学院学报,2004,23(3):215-218. 被引量:9
-
2陈家祥.连续铸钢手册[M].北京:冶金工业出版社,1991..
-
3干勇.连续铸钢过程数学物理过程[M].北京:冶金工业出版社,2001..
-
4王雅贞,张岩,刘术国.连续铸钢丁二艺及设备.北京:冶金工业出版社,2003.
-
5Bommaraju R, C-lennon R, Frazee M. Analysis of the Cause and Prevention of Longitudinal Midface Cracks and Depressions on Continuously Cast Free-machining Steel Blooms. Proceedings of the First European Conference on Continuous Casting, Florence, Italy, 1991 : 1599
-
6Pinakin Chaubal, Rama Bommaraju. Development and Use of a Model to Predict in-Mold Slag Composition during the Continuous Casting of Steel. In:Iron and Steel Society,Inc. Steelmaking Conference Proceedings, 1992,75:665
-
7舒俊.连铸保护渣传热性能的基础研究.北京:北京科技大学出版,2001:46
-
8Hiraki S, Nakjima K, Murakami T, et al. Influence of mould heat fluxes on longitudinal surface cracks during high speed continuous casting of steel slab [ J ]. Steelmaking Conference Proceedings, 1994,77:397.
-
9Tsukaguchi Y. Development of slab casting technology for high carbon steel [ J]. Steehnaker conference proceedings, 1993: 397 -403.
-
10Mcpherson N A, McIntosh S L. Mould powder related defects in some continuous cast steel products [ J]. Iron Steelmaker, 1987,6 : 19.
引证文献3
-
1苏东,庄汉洲,高吉祥,王进步,李亚平,洪兵雄,沈训良.EAF—CSP流程铌微合金化管线钢的连铸工艺[J].连铸,2006,31(4):8-10. 被引量:2
-
2王新月,金山同,苍大强.连铸过程结晶器内液态保护渣中MnO含量变化模型[J].特殊钢,2006,27(6):15-17.
-
3杨晓江,何先勇.减少薄板坯连铸坯纵裂纹的实践研究[J].上海金属,2012,34(6):47-51.
二级引证文献2
-
1何小东,韩新利,杨红兵,陈宏达,张雪琴.铌-钛复合微合金CSP流程生产X60管线钢的组织及性能[J].材料工程,2008,36(5):20-23. 被引量:2
-
2何小东,朱丽霞,杨红兵.采用CSP工艺生产的Nb-Ti复合微合金X60钢级管线钢的组织和性能[J].钢管,2008,37(6):27-31. 被引量:2
-
1杨晓江,杨春政,张洪坡.薄板坯连铸结晶器传热行为的研究[J].钢铁,2004,39(z1):431-435. 被引量:2
-
2果晶晶,郝华强,杨晓江,刘增勋,王书桓.FTSC薄板坯连铸结晶器内的热/力行为研究[J].材料工程,2010,38(3):70-73. 被引量:3
-
3冯运莉,陈华辉,陈礼斌.唐钢超薄热轧带钢生产线的质量控制技术[J].钢铁钒钛,2005,26(2):16-19. 被引量:4
-
4张慧,吴夜明,徐李军,陶红标,张洪波,杨晓江.唐钢新型薄板坯连铸结晶器的设计和使用效果[J].钢铁,2007,42(5):19-24. 被引量:7