1[1]An, W., Saadatmanesh, H. and Ehsani, M. R., "RC Beams Strengthened with FRP Plates Ⅱ: Analysis and Parametric Study", Journal of Structural Engineering, ASCE, 1991, Vol. 117, No. 11, 3434-3455
2[2]Wu, Z.S., "Research Trends on Retrofitting and Strengthening Concrete Structures by FRP Sheets and Plates", International Conference on Fibre Reinforced Concrete, October, 1997, Guangzhou, China,9-17
3[3]Wu, Z.S., Matsuzaki, T., Fukuzawa, K. and Kanda, T., "Strengthening Effects on RC Beams with Externally Prestressed Carbon Fiber Sheets", Journal of Materials, Concrete Structures and Pavements,JSCE, 2000, Vol. 46, No. 641, 153-165 (in Japanese)
4[4]Roberts, T.M., "Approximate Analysis of Shear and Normal Stress Concentrations in the Adhesive Layer of Plated RC Beams", The Structural Engineer, 1989, Vol. 67, No. 12, 229-233
5[5]Ziraba, Y.N., Baluch, M.H., Basunbul, I.A., Sharif, A.M., Azad, A.K., and Al-Sulaimani, G.J.,"Guidelines toward the Design of Reinforced Concrete Beams with External Plates", ACI Structural Journal, 1994, Vol. 91, No. 6, 639-646
6[6]Quantrill, R.J., Hollaway, L.C., and Thorne, A.M., "Predictions of the Maximum Plate End Stresses of FRP Strengthened Beams: Part Ⅱ", Magazine of Concrete Research, 1996, Vol. 48, No. 177, 343-351
7[7]Malek, A.M., Saadatmanesh, H., and Ehsani, M.R., "Prediction of Failure Load of R/C Beams Strengthened with FRP Plate due to Stress Concentration at the Plate End", ACI Structural Journal,1998, Vol. 95, No. 1, 142-152
8[8]Al-Sulaimani, G.J., Sharif, A., Basunbul, I.A., Baluch, M.H., and Ghaleb, B.N., "Shear Repair for Reinforced Concrete by Fiber Glass Plate Bonding", ACI Structural Journal, 1994, Vol. 91, No. 3,458-464
9[9]Khalifa, A., Gold, W. J., Nanni, A., and Abdel Aziz, M.I., "Contribution of Externally Bonded FRP to Shear Capacity of Flexural Members", Journal of Composites for Construction, ASCE, 1998, Vol. 2, No.4, 195-203
10[10]Triantafillou, T.C. and Antonopoulos, C.P., "Design of Concrete Flexural Members Strengthened in Shear with FRP", Journal of Composites for Construction, ASCE, 2000, Vol. 4, No. 4, 198-205
