3[3]Koski K, Holsa J, Juliet P. Properties of zirconium oxide thin films deposited by pulsed reactive magnetron sputtering.[J]. Surface and Coatings Technology, 1999, 120-121: 303.
4[5]Pengtao G, Meng L J, Dos Santos M P, et al. Characterisation of ZrO2 films prepared by rf reactive sputtering at different O2 concentrations in the sputtering gases. [J].Vacuum, 2000, 56(2): 143.
6[7]Fbris S, Paxton A T, Finnis M W. A stabilization mechanism of zirconia based on oxygen vacancies only. [J]. Acta Materialia, 2002, 50(20): 5171.
7[8]Pengtao G, Meng L J, Dos Santos M P, et al. Characterisation of ZrO2 films prepared by rf reactive sputtering at different O2 concentrations in the sputtering gases. [J].Vacuum, 2000, 56(2): 143.
8[9]Kao A S, Gorman G L. Modification of zirconia film properties by low-energy ion bombardment during reactive ion-beam deposition. [J]. J. Appl. Phys, 1990, 67(8): 3826.
9[10]Garvie R C. Stabilization of the tetragonal structure in zirconia microcrystals. [J]. J. Phys. Chem, 1978, 82(2): 218.
10[11]Ji Z, Haynes J A, Ferber M K, et al. Metastable tetragonal zirconia formation and transformation in reactively sputter deposited zirconia coatings. [J]. Surface and Coatings Technology, 2001, 135(2-3): 109.
二级参考文献15
1路新瀛,J Am Ceram Soc,1994年
2Cheng Y B,J Am Ceram Soc,1993年,76卷,3期,683页
3CHATTERJEE A, CHAPMAN R, JOYNER K,et al. Tech Dig Int Electron Devices Meet, 1998: 777.
4KIZILYALLI I C, HUANG R Y S, ROY P K. IEEE Electron Device Lett, 1998,19: 423.
5PARK D, KING Y-C, LU Q,et al. IEEE Electron DeviceLett, 1998, 19: 441.
6LUAN H F, WU B Z, KANG L G,et al . Tech Dig Int Electron Devices Meet, 1998: 609.
7HE B, MA T, CAMPBELL S A,et al. Tech Dig Int Elec tron Devices Meet, 1998:1038 .
8GURVITCH M, MANCHANDA L, GIBSON J M. Appl Phys Lett, 1987, 51: 919.
9MANCHANDA L, GURVITCH M. IEEE Electron Device Lett, 1988, 9: 180.
10MANCHANDA L, LEE W H, BROWER J E,et al .Tech, Dig Iht Electron Devices Meet, 1998:605 .