摘要
通过研究打桩公式法和应力波动法 (如CASE法 ) ,提出单次冲击能量及P S曲线测桩法 :用重锤或小型火箭筒一次冲击桩顶 ,用桩顶附近的检波器记录振波图和检测静、动位移 .通过实测冲击能 (总能量 )转换系数、波动和振动各自消耗的能量等各物理量 ,测定计算单桩竖向承载力 .利用振波图计算力 (P)与位移 (S)动态关系曲线 ,确定屈服点 ,并利用静载荷试验检验动测结果和确定动静P S曲线的相关常数 ,进而确定与承载力相应的沉降量 .而且 ,可由PS曲线的形态判定桩身成型质量 .
By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded, and the dynamic and static displacements are measured by different transducers near the top of piles when the pile is impacted by a heavy hammer or micro-rocket. By observing the transformation coefficient of driving energy (total energy), the consumed energy of wave motion and vibration and so...
出处
《地震学报》
CSCD
北大核心
2004年第S1期131-140,共10页
Acta Seismologica Sinica
基金
云南省"十五"重点项目 (云计地区 [2 0 0 2 ]5 4 0 2 0 2 )
云南省地球物理学会共同资助
关键词
单次冲击
能量法
动态P-S曲线
单桩承载力测定
桩身质量评估
single impact
energy method
dynamic P-S curves
observation of single-pile bearing capacity
quality estimation of pile body