汽车轻量化中的管材液压成形技术

Technology of Tube Hydroforming in Lightweight of Automobile

下载PDF

导出

摘要管材液压成形技术近来获得了广泛的应用.汽车结构轻量化是其重要的应用领域之一.本文对管材液压成形的原理、分类及液压成形过程中产生的塑性失稳等进行了综述,并介绍了典型汽车零部件采用液压成形的工艺过程和液压成形技术的最新进展.

作者韩英淳于多年马若丁

出处《汽车工程》 EI CSCD 北大核心 2003年第z1期36-43,共8页 Automotive Engineering

关键词汽车轻量化管材液压成形

参考文献13

1[1]F.Dohmann, Ch. Hartl. Tube hydroforming-reseach and practical application. J. Mat. Proc. Tech, 1997 (71) : 174～186
2[6]Terumori Ueda. Differential gear casting for automobiles by liquid bulge forming process-part 2. Sheet metal industries, April 1983, 220～224
3[7]K. MANABE, S. NAKAMURA. Finite Element Simulation of Hydroforming Process of Pre-bent Circular Tubes. NUMISHEET'99, 1999.9, FRANCE,503～508
4[8]Chi-Mou Ni, Charles J. Bruggemann, Tasnim Hassan, Application of Hydrofomed Aluminum Extrusions to Vehicle Sub-Frame With Varied Wall Thickeness, SAE, 1999-01-3180
5[9]F.Dohmann,Ch.Hartl,Hydroforming-a method to manufacture light-weight parts.J.Mat.Pro.tech. 1996 (60) :669～673
6雷丽萍,方刚,曾攀,张慧玲.汽车副架液压胀形预成形工艺设计的数值模拟[J].塑性工程学报,2002,9(2):76-78. 被引量：17
7[11]Bogoyavlensky K.N.et al.:lzgotovlenie Slozhnyh Polyh Detalei,Mashinostroenie(1979)
8吴洪飞,苑世剑,王仲仁.内高压成形塑性屈曲分析[J].锻压技术,2001,26(5):29-31. 被引量：10
9[14]F. Klaas, Aufweitstauchen von Rohran durch Innerhoch druckumformen Fortschrittsbericht VDI, Reihe 2: Fertigunstechnik. Nr. 42, Dusseldorf. VDI-Verlag, 1987
10[15]J. Tomasek, Automatisiertes Innendruckumformen von Rohrformtuchen, Blech Rohre Profi le. 38(6),1991, 505～508

1李洪洋.管坯内高压液力成形工艺的实验研究与数值模拟.哈尔滨工业大学硕士学位论文[M].-,1999..
2陈强.静水压作用下加肋圆柱壳的屈曲分析.清华大学工学博士学位论文[M].-,1994..
3张旭.环壳整体液压胀形工艺的研究.哈尔滨工业大学工学博士学位论文[M].-,1998(3)..
4[1]Dohman F,Hartl Ch.Tube hydroforming-research and practical application.J Mat Proc Tech,1997,71:174～186
5[2]Hill R.The mathematical theory of plasticity.London:Oxford University Press,1950
6[3]Lei L P,Kim J,Kang B S.Analysis and design of hydroforming process for automobile rear axle housing by FEM.Int J of Machine Tools and Manufacture,2000,40(12):1691～1708
7[4]Lei L P,Kim D H,Kang S J,et al.Analysis and design of hydroforming processes by the rigid-plastic finite element method.J Mat Proc Tech,2001,114(3):201～206
8[5]M Oyane,T Sota,K Okintoto,S Shima.Criteria for ductile fracture and their applications.J.Mech.Work.Tech.1980,4:65～81
9[6]Lei L P,Kim D H,Kang S J,et al.Prediction of Forming Limits of Hydroforming Process by Using FEM and Fracture Criterion,Metal Forming 2000,Poland,2000:171～178
10[7]Lei L P,Kang B S,Kang S J.Prediction of the forming limit in hydroforming processes using the finite element method and a ductile fracture criterion.J Mat Proc Tech,2001,113(1-3):673～679

汽车工程

2003年第z1期

内容加载中请稍等...