1[1]Flemings M C. Behavior of Metal Alloys in the Semisolid State. Metall. Trans. 1991, (22A): 957～981
2[2]Kirkwood D H. Semisolid Metal Processing. Int. Mater. Rev. 1994, 39(5):173～189
3[3]Jae-Chul Lee, Ji-Young Byun, Chang-Seok Oh, Hyun-Kwang Seok, and Ho-In Lee. Effect of Various Processing Methods on the Interfacial Reactions in SiCp/2024 Al Composites. Acta Metall. Mater. 1997, 45(12):5 303～5 315
4[4]Murakami H, Yoshikawa Y, Takebayashi K et al. Nanba. Semi-solid Metal Making of High Melting Point Alloys by Electromagnetic Stirring. Proceedings of the 2nd International Conference on Semi-solid Processing of Alloys and Composites. MIT. USA,1992: 67～75
5[5]Blais S,Loue W,Pluchon C. Structure Control by Electromagnetic Stirring and Reheating at Semi-solid State. In: D.H. Kirkwood, P.Kapranos. Proc. 4th International Conference on the Processing of Semi-solid Alloys and Composites, Sheffield, University of Sheffield, 1996: 187～192
6[6]Kim K B,Lee H L,Moon H K. Microstructures and Formability of Electromagnetically Stirred Billet of High Melting Point Alloys. Proc. 5th International Conference on the Processing of Semi-solid Alloys and Composites, USA, Colorado School of Mines, Golden, CO, 1998,415～422
7[7]Gabathuler J P. Evaluation of Various Processes for the Production of Billets with Thixotropic Properties. 2nd ICSSPAC Transaction. 1992: 33～46
8[8]Young R M K, Clyne T W.A Powder Mixing and Preheating Route to Slurry Production for Semisolid Diecasting. Powder Metall. 1986, 29(3):195～199
9[9]Young R M K,Clyne T W. A Powder-Based Approach to Semisolid Processing of Metals for Fabrication of Die-Castings and Composites. J. Mater. Sci. 1986, (21): 1057～1069
10[10]Stanford Beale C A,Young R M K,Clyne T W.Fabrication of Metal Matrix Composites by Powder-based Routes Including Semi-solid Processing and Extrusion. 1987: 447～450
