摘要
采用正交试验分析了冲头式挤压铸造工艺参数对ZA2 7合金力学性能指标的影响。结果表明 :ZA2 7合金冲头式挤压铸造工艺参数影响的主次顺序为比压、铸型温度、浇注温度和保压时间。在适宜的工艺参数下ZA2 7合金力学性能可以达到 :σb=44 0MPa ,δ5=12 % 。
The effect of experimental variables on the mechanical properties for ZA27 casting alloy during punching squeeze casting processing has been investigated on the basis of orthogonal experiment. The result shows the order of influential factors as:specific pressure, die temperature,pouring temperature and pressure holding time. At a proper valve of these factors,the mechanical property of the ZA27 alloy could reach σ b=440 MPa, δ s=12%,HBS130.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2002年第S1期-,共3页
Special Casting & Nonferrous Alloys
关键词
正交试验
冲头式挤压铸造
ZA27合金
Orthogonal Experiment
Punching Squeeze Casting
ZA27 Alloy
Mechanical Property