期刊文献+

半固态复合熔铸过程中SiC与2A11合金的润湿性 被引量:9

Wettability of SiC and 2A11 alloy in semi-solid casting process
下载PDF
导出
摘要 研究了SiC增强铝基复合材料的半固态法制备 ,分析了SiC颗粒与基体金属之间的润湿性 ,提出了解决SiC颗粒与基体金属之间润湿的措施。结果表明 :将SiC颗粒进行高温处理 ,在其表面涂覆K2 ZrF6,在 2A11合金熔体中添Mg元素 ,可改变SiC与铝基体的浸润性。 The 2A11 matrix composite reinforced by SiC was studied, which was fabricated by semi solid casting. The influence factor of wetting between SiC and matrix metal was analyzed, and the way was supplied to solve this problem. The results show that the wettability can be improved by treating SiC in high temperature, coating K 2ZrF 6 on it, and adding Mg in 2A11 alloy.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2001年第z2期77-80,共4页 The Chinese Journal of Nonferrous Metals
关键词 半固态 电磁搅拌 润湿性 金属基复合材料 semi solid electromagnetic stirring wetting metal matrix composites
  • 相关文献

参考文献11

  • 1袁广江,章文峰,王殿斌,桂满昌,吴洁君.SiC颗粒增强铝基复合材料制备及机加性能研究[J].复合材料学报,2000,17(2):38-41. 被引量:56
  • 2秦蜀懿,张国定.改善颗粒增强金属基复合材料塑性和韧性的途径与机制[J].中国有色金属学报,2000,10(5):621-629. 被引量:56
  • 3[3]Flemings M C.Behavior of metal alloys in the semisolid state [J].Metallurgical Transactions A,1991(5): 957-981.
  • 4[4]YU Yong-ning(余永宁),LIU Guo-quan (刘国权).Stereology-Principles and Application of Microstructure Analysis(体视学-组织定量分析的原理和应用) [M].Beijing: Metallurgical Industry Press,1989.
  • 5[5]Pellissier G E,Purdy S M.Stereology and Quantitative Metallography(体视学和定量金相学) [M].Beijing: Mechanical Industry Press,1982.
  • 6[6]Banderlif B E.Refine Treatment of Deformable Aluminum Alloy(变形铝合金的细化处理) [M].Beijing: Metallurgical Industry Press,1988.
  • 7张守魁,王丹虹,高洪吾,高钦.铝液与SiO2反应原位形成Al/Al2O3(P)复合材料的研究[J].铸造,1996,45(7):4-7. 被引量:24
  • 8[8]Lloyd D J.Particle reinforced aluminium and magnesium matrix composites [J].International Materials Reviews,1994,39(1): 1-22.
  • 9[9]Rocher J P,Quenisset J M,Naslain R.A new casting processing for carbon(or SiC-based) fibre-aluminium matrix low-cost composite materials [J].Journal of Materials Science Letters,1985(4): 1527-1529.
  • 10[10]Rocher J P,Quenisset J M,Naslain R.Wetting improvement of carbon or silicon carbide by aluminium alloys based on a K2ZrF6 surface treatment: application to composite material casting [J].Journal of Materials Science,1989(24): 2697-2703.

二级参考文献19

共引文献209

同被引文献104

引证文献9

二级引证文献58

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部