摘要
以异丙醇铝为原料通过溶胶—凝胶法制备了非担载超滤Al2O3膜。对主要制备因素即胶溶剂的种类及用量、水解温度和加水量、老化温度及老化时间、焙烧温度等进行了研究。实验表明所制备的非担载超滤Al2O3膜在500℃焙烧所得膜的孔径小于5nm,且孔径分布均匀。
Ultre - filtrated Al2O3 film is prepared by sol - gel process with the aid of alumina isopropyl alcoholate in this study.lt also studies the main factors affecting its preparing process including the types and quantities of used peptizers, hydrolytic temperature, amount of added water, ageing tempemture, sintering temperature and so on. The result show that the pore size of obtained ultra - filtrated Al2O3 film sintered at 500℃ is smaller than sum and pore size distributions is well - distributed.
出处
《陶瓷学报》
CAS
2001年第1期1-6,共6页
Journal of Ceramics
基金
江西省九五攻关项目
关键词
溶胶-凝胶法
超滤Al2O3膜
孔径
sol - gel process, ultra - filtrated Al2O3 film,pore size