期刊文献+

陶瓷/铝合金复合装甲倾角效应研究 被引量:2

Study on the obliquity of ceramic/aluminum alloy composite armor
下载PDF
导出
摘要 采用12.7mm穿甲枪弹,进行陶瓷/铝合金复合装甲在不同倾角条件下抗弹侵彻试验,研究倾角效应对抗弹性能的影响。研究结果表明:陶瓷复合装甲的倾角效应为正效应,即随着倾角增大,陶瓷的抗弹性能提高;弹靶作用时陶瓷面板中倒陶瓷锥的形成是陶瓷复合装甲抗弹性能提高的主要原因。 With the 12.7 mm Armor Piercing (AP) ammunition, this paper focused on the performance of the ceramic/aluminum armors when subjected to the oblique impact at the different obliquity,and investigated the influence of effects of obliquity on the ballistic properties of such armors. DOP method was used to evaluate the ballistic properties of composite armors. It was found that effects of obliquity of ceramic composite armor was normal, namely ballistic properties increased with obliquity. When composite target...
出处 《兵器材料科学与工程》 CAS CSCD 2009年第2期87-88,共2页 Ordnance Material Science and Engineering
关键词 倾角效应 陶瓷/铝合金 复合装甲 倒陶瓷锥 effects of obliquity ceramic/aluminum alloy composite armor reverse conoid of comminuted ceramic
  • 相关文献

参考文献4

二级参考文献12

  • 1宋焕成,张佐光.军机高生存力设计与复合材料防护装甲[J].航空制造工程,1993(10):3-5. 被引量:2
  • 2张自强.均质装甲钢倾角效应的试验研究[J].兵器材料科学与工程,1995,18(4):31-38. 被引量:9
  • 3Gupta N K, Madhu V. Normal and Oblique Impact of a Kinetic Energy Projectile on Mild Steel Plates [J]. Int J Impact Eng. 1992, 12 (3): 333-343.
  • 4Gupta N K, Madhu V. An Experimental Study of Normal and Oblique Impact of Nard-Core projectile on Single and Layered Plates [J]. Int J Impact Eng. 1997, 19: 395-414.
  • 5Duane S C, Khahn Bui, Christian Kaomagma, et al.Implementation and Validation of the Johnson-Hoimquist Ceramic Material Model in LS-Dyna [C], 4th European LS-DYNA Users Conference.
  • 6Anderson CE and Walker JD. An Analytical Model for Dwell and Interface Defeat [J]. Int J Impact Eng. 2005, 31(9): 1119-1132.
  • 7午新民,博士学位论文,1997年
  • 8李景云(译),终点效应设计,1988年,222页
  • 9Marvin E backman. Terminal ballistics[M]. USA Naval Weapons Center, 1976:77-89.
  • 10赵国志.穿甲工程力学[M].北京:兵器工业出版社,1989.21.

共引文献23

同被引文献12

引证文献2

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部