期刊文献+

大炸高条件下药型罩结构设计 被引量:9

The Design of Liner Under Large Standoff Distance Condition
下载PDF
导出
摘要 炸高是破甲威力的主要影响因素 ,尤其在大炸高情况下 ,由于射流很容易断裂 ,破甲威力难以提高 ,通过对药型罩结构的设计 ,改善了射流形成情况 ,试验表明合理的药型罩结构设计能明显提高大炸高射流的穿深。 The standoff distance has great influence to HEAT projectile power, Especially the jet is easy to rupture under large standoff distance. So the improvement of HEAT projectile power is diffcult. In this paper the jet formation has improved through the design of liner. It to be invalid that the pentration depth has been improved through the liner structure design in reason under large standoff distance condition.
出处 《弹箭与制导学报》 CSCD 北大核心 2000年第3期51-53,共3页 Journal of Projectiles,Rockets,Missiles and Guidance
关键词 炸高 药型罩 设计 standoff distance liner design
  • 相关文献

同被引文献50

  • 1张煜,高翔.外军最新轻型轮式装甲车辆简介[J].汽车运用,2004(12):15-15. 被引量:1
  • 2孙克恕.关于刚体定轴转动定律与角动量[J].安庆师范学院学报(自然科学版),1995,1(2):98-98. 被引量:4
  • 3江增荣,王海福,李世才,冯顺山.某型破甲弹动态威力数值模拟[J].弹箭与制导学报,2006,26(2):54-56. 被引量:3
  • 4刘国跃,龚劲涛,吴英.单摆运动的非谐振和弱阻尼修正[J].绵阳师范学院学报,2007,26(2):38-41. 被引量:6
  • 5李裕春.线型聚能射流的数值模拟及装药结构参数优化研究[D].南京:解放军理工大学工程兵工程学院,2001
  • 6徐全军,汪庆桃.大型钢结构物线型聚能(装药)爆破技术研究[R].南京:解放军理工大学工程兵工程学院,2002
  • 7崔云航.爆炸切割影响因素研究和优化设计[D].南京:解放军理工大学工程兵工程学院,2005
  • 8高森烈.炸高对破甲深度影响的实验研究[C]//破甲技术文集.北京:国防工业出版社,1982:28-37.
  • 9Hottenkolber E, Arnold W. Rotation rates and lateral velocities ofshaped charge jet particles caused by breakup [ C] // Proceedings ofthe 21 st International Symposium on Ballistics. Adelaide, Austral-ia :Australian Government Department of Defence, 2004 : 845 -852.
  • 10Mayseless M , Kaufmann H, Misiuk L,et al. Very long standoffpenetration of shaped ^charge jets[ C ] // Proceedings of the 28th In-ternational Symposium on Ballistics. Atlanta, Georgia, US: Na-tional Defense Industrial Association, 2014 : 195 - 206.

引证文献9

二级引证文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部