摘要
The three-dimensional electromagnetic characteristics and non-uniform distribution of electromagnetic field in soft-contact continuous casting mold have been analyzed by numerical simulation. The results show that the maximum electromagnetic flux density is found in front of slit; the electromagnetic flux density becomes large as the coil current and slit number increase. In a certain frequency range, the electromagnetic flux density increases with the increase of frequency and the frequency range is different with the change of azimuthal position along the inner wall of mold. The uniformity of electromagnetic field is influenced mainly by frequency and mold structure parameters. Increasing slit number and adjusting slit arrangement position can improve the electromagnetic flux density and the uniformity of electromagnetic field. For a soft-contact mold with 16 slits, when frequency is 20 kHz, the optimal slit arrangement parameter is a:b=1:2, c=0.
The three-dimensional electromagnetic characteristics and non-uniform distribution of electromagnetic field in soft-contact continuous casting mold have been analyzed by numerical simulation. The results show that the maximum electromagnetic flux density is found in front of slit; the electromagnetic flux density becomes large as the coil current and slit number increase. In a certain frequency range, the electromagnetic flux density increases with the increase of frequency and the frequency range is different with the change of azimuthal position along the inner wall of mold. The uniformity of electromagnetic field is influenced mainly by frequency and mold structure parameters. Increasing slit number and adjusting slit arrangement position can improve the electromagnetic flux density and the uniformity of electromagnetic field. For a soft-contact mold with 16 slits, when frequency is 20 kHz, the optimal slit arrangement parameter is a:b=1:2, c=0.
基金
Acknowledgements - This project is supported by the National Natural Science Foundation of China (Grant No.59734080) and the Pl
