期刊文献+

Measurement and Analysis of Movement of BPM Vacuum Chamber for HLS

合肥光源BPM真空室位移的测量与分析
原文传递
导出
摘要 The beam horizontal orbit at Hefei Light Source(HLS)was drifting all along while the storage ring was operating.To study this phenomenon,the displacement and the temperature variation of the BPM chamber were measured.By analyzing the measurement results,the main reason that explained the drifting phenomenon was found. The vacuum chamber following the dipole magnets was heated by the synchrotron light,which caused the increasing of the chamber surface temperature.The variation of the chamber temperature was the main reason why the BPM chamber held the horizontal displacement.To suppress the orbit drifting,a compensation method of BPM movement was proposed and its experimental results were given. 合肥光源电子储存环的束流水平轨道存在缓慢漂移现象,本文针对这一现象进行了束流位置检测器(BPM)真空室形变、位移和温度等参数的测量.通过这些测量,分析了BPM真空室的形变、位移、温度以及束流轨道漂移与束流流强的关系,对束流水平轨道的漂移现象做出合理的解释,即导致轨道水平漂移的主要原因是同步光热效应导致BPM真空室水平移动,提出了采用补偿方法对BPM的轨道测量值进行实时修正,从而提高了慢速轨道反馈系统有效性.
出处 《Chinese Physics C》 SCIE CAS CSCD 北大核心 2008年第z1期127-129,共3页 中国物理C(英文版)
基金 国家自然科学基金项目(10675118) 中国科学院创新项目(KY4206)资助~~
关键词 beam horizontal orbit thermal effect of SR raster gauge movement of BPM vacuum chamber correction on-line 束流水平轨道 同步光热效应 光栅尺 BPM真空室位移 实时修正
  • 相关文献

参考文献5

  • 1[1]XUAN Ke et al.Journal of University Science and Technology of China,2007,7(4-5):497-499(in Chinese)宣科等.中国科学技术大学学报,2007,37(4-5):497-499)
  • 2[2]Tsai Z D,Lee D S et al.The Efiect of Improving The Temperature Variation At The SRRC Storage Ring.Proceedings of EPAC 2000.Vienna:2000.2483-2485
  • 3[3]Tejima M.Arinaga M et al.Movement of BPMS Due To Thermal Stress In KEKB.Proceedings of PAC 2005.Knoxville:2005.3253-3255
  • 4[4]Safranek J,Singh O et al.Orbit Stability Improvement At The NSLS X.Ray Ring.Proceedings of PAC 1995.Dallas:1995.2711-2713
  • 5[5]GUO W Q et al.High Power Laser and Particle Beams,2006,8(12):2074-2077(in Chinese)(郭卫群等.强激光与粒子束,2006,8(12):2074-2077)

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部