摘要
Both experiment and simulation are made on the AlMg4 . 5Mn0 .4 sheet blanking with 1 % , 10% and 20% relative clearance respectively. The cutting force curves and the cutting surface parameters which can be used to describe the quality of the blankings are measured. Simulation is accomplished by MARC Autoforge software package. Calculated cutting forces are always bigger than measured ones. All difference between experiment and simulation is not greater than 20% . It is feasible making virtual experiment on workstation to estimate the cutting force and to predict the quality of the workpiece for new material using certain blanking technical parameters.
Both experiment and simulation are made on the AlMg4 . 5Mn0 .4 sheet blanking with 1 % , 10% and 20% relative clearance respectively. The cutting force curves and the cutting surface parameters which can be used to describe the quality of the blankings are measured. Simulation is accomplished by MARC Autoforge software package. Calculated cutting forces are always bigger than measured ones. All difference between experiment and simulation is not greater than 20% . It is feasible making virtual experiment on workstation to estimate the cutting force and to predict the quality of the workpiece for new material using certain blanking technical parameters.
