期刊文献+

FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR 被引量:1

FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR
下载PDF
导出
摘要 The special subject 'research on life prediction technology of important in-service pressure' mainly analyzes the failure mechanism of large-sized important and criticalin-service pressure vessels under the action of working medium and investigates safety assessmentand life prediction technology with a view to enhance the operation reliability of in-servicepressure vessels in China. Based on a series of accident investigation and test & measuringresearch, the cause of cracking of catalytic regenerator is analyzed and the in-line non-destructiveexamination method and failure prevention measures for the cracking of catalytic regenerator areproposed. The special subject 'research on life prediction technology of important in-service pressure' mainly analyzes the failure mechanism of large-sized important and criticalin-service pressure vessels under the action of working medium and investigates safety assessmentand life prediction technology with a view to enhance the operation reliability of in-servicepressure vessels in China. Based on a series of accident investigation and test & measuringresearch, the cause of cracking of catalytic regenerator is analyzed and the in-line non-destructiveexamination method and failure prevention measures for the cracking of catalytic regenerator areproposed.
出处 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2002年第2期167-172,共6页 中国机械工程学报(英文版)
基金 important scientech problemtackling subject foundation under the state 9th 5-year plan(no.96-918-02-04).
关键词 In-service catalytic regenerator CRACK Failure analysis EXAMINATION In-service catalytic regenerator Crack Failure analysis Examination
  • 相关文献

参考文献2

  • 1[1]SINOPEC,Beijing Design Research Institute.Working report on the analysis of cracking of catalytic regeneration system equipment,1998
  • 2[2]Chen Xuedong,Yang Tiecheng,Chen Wenhu,et al.Safety analysis and service life extension technology of typical pressure vessels of petrochemical enterprises.Wuxi:Chinese Pressure Vessel Institution,1999

同被引文献10

  • 1Parkins R.N.,Usher R.The Effect of Nitrage Solutions in Producing Stress Corrosion Cracking in Mild Steel[A].First Intern. Congr. On Metallic Corrosion[C].London,1961.206.
  • 2Flis J.Action of Carbon in Stress Corrosion Cracking of Mild Steel in Nitrate Solutions[J].Corrosion, 1973, 29(1):37-41.
  • 3Flis J.,Scully J.C.The Role of Interstitial and Substitional Impurities in Stress Corrosion Cracking of Low Carbon Steel in Nitrate Solution[J].Corrosion,1968,24(10):326-334.
  • 4Long L.M.,Lockington N.A.The mechanism of Stress Corrosion cracking in pure Fe-base alloys[J].Corros.Sci.,1971,11:853-872.
  • 5Mazille H., Uhlig H. H. Effect of Temperature and Some Inhititors on Stress Corrosion Cracking of Carbon Steels in Nitrate and Alkaline Solutions[J].Corrosion,1972,28(11):427-433.
  • 6Flis J., Mieluch J., Smialowski M. Electrochemical Behavior and Corrosion of Iron Crystals in Ammonium Nitrate Solutions[J].Corrosion,1964,20,(5):184-187.
  • 7Long L.M., Uhlig H.H. Effect of Carbon and Oxygen in Iron on Stress Corrosion Cracking in Nitrate Solution[J].J.Electrochem.Soc.,1965,112(10):964-967.
  • 8.催化再生系统设备开裂分析工作汇报[R].北京:中国石化北京设计院,1998,11..
  • 9杨德凤,刘凯,张金锐,龚宏.从催化裂化烟气分析结果探讨再生设备的腐蚀开裂[J].石油炼制与化工,2001,32(3):49-53. 被引量:29
  • 10范志超,金志江,蒋家羚.16MnR钢在硝酸盐环境下应力腐蚀性能试验研究[J].压力容器,2003,20(5):20-22. 被引量:1

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部