期刊文献+

Spatio-temporal characteristics of acoustic emission during the deformation of rock samples with compressional and extensional en-echelon faults 被引量:4

Spatio-temporal characteristics of acoustic emission during the deformation of rock samples with compressional and extensional en-echelon faults
下载PDF
导出
摘要 The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing structure can significantly influence the patterns of AE spatial distribution. With increasing of differential stress, AE events firstly cluster around the two ends of pre-existing faults inside the jog and then along the line joining the two ends. The biggish AE events often occur around one end repeatedly. The image of AE clusters indicates the direction and the area of the fracture propagation. The direction of the macroscopic fracture in extensional and compressional jogs is perpendicular and parallel to the direction of axial stress, respectively. The weakening process before the fracturing of jog area is remarkable, and one of the typical precursors for the instability is that the cumulative frequency of AE events increases exponentially. After the fracturing of the jog the frequency and releasing strain energy of AE events decrease gradually. During the friction period, there is no precursory increasing of AE activity before the big stick-slip events. The change of b value in jog shows a typical change of decreasing tendentiously returning quickly before the instability. The decrease of b value occurs in the process of stress increasing and sometime goes down to the weakening stage, and the quick increase b values appears in a short time just before the instability. The comparative analysis shows that the difference in b value due to the different structures is larger than b value variation caused by increase of the differential stress. For the same sample, the temporal sequence of AE is strongly affected by the mechanical state, and the high loading velocity corresponds to the high release rate of strain energy and low b value. Due to its lower failure strength, the broken area is sensitive to small changes in differential stress. Therefore, it offers a potential explanation for the phenomena of precursory window or sensitive point and separation of seismic source and precursors. The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing structure can significantly influence the patterns of AE spatial distribution. With increasing of differential stress, AE events firstly cluster around the two ends of pre-existing faults inside the jog and then along the line joining the two ends. The biggish AE events often occur around one end repeatedly. The image of AE clusters indicates the direction and the area of the fracture propagation. The direction of the macroscopic fracture in extensional and compressional jogs is perpendicular and parallel to the direction of axial stress, respectively. The weakening process before the fracturing of jog area is remarkable, and one of the typical precursors for the instability is that the cumulative frequency of AE events increases exponentially. After the fracturing of the jog the frequency and releasing strain energy of AE events decrease gradually. During the friction period, there is no precursory increasing of AE activity before the big stick-slip events. The change of b value in jog shows a typical change of decreasing tendentiously returning quickly before the instability. The decrease of b value occurs in the process of stress increasing and sometime goes down to the weakening stage, and the quick increase b values appears in a short time just before the instability. The comparative analysis shows that the difference in b value due to the different structures is larger than b value variation caused by increase of the differential stress. For the same sample, the temporal sequence of AE is strongly affected by the mechanical state, and the high loading velocity corresponds to the high release rate of strain energy and low b value. Due to its lower failure strength, the broken area is sensitive to small changes in differential stress. Therefore, it offers a potential explanation for the phenomena of precursory window or sensitive point and separation of seismic source and precursors.
出处 《Acta Seismologica Sinica(English Edition)》 CSCD 2002年第4期402-413,共12页
基金 Project Study on the Short-term Forecasting Technique of Strong Earthquake (01-04-01) during the Tenth Five-Year Plan from Ministry of Science and Technology of China and Joint Seismological Science Foundation of China (102037).
关键词 acoustic emission rock sample compressional en-echelon fault extensional en-echelon fault biaxial experiment differential stress acoustic emission rock sample compressional en-echelon fault extensional en-echelon fault biaxial experiment differential stress
  • 相关文献

同被引文献10

引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部