期刊文献+

The accurate location of the injection- induced microearthquakes in German Continental Deep Drilling Program 被引量:1

The accurate location of the injection- induced microearthquakes in German Continental Deep Drilling Program
下载PDF
导出
摘要 From August 21, 2000 to October 20, 2000,a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 events. Among them 237 events were of high signal-to-noise ratio, and were processed and accurately located. When the events were located, non KTB events were weeded out by Wadatis method. The standard deviation, mean and median were obtained by Jackknife's technique, and finally the events were accurately located by Gei-gers method so that the mean error is about 0.1 km. No earthquakes with focal depth greater than 9.3 km, which is nearly at the bottom of the hole, were detected. One of the explanation is that at such depths the stress levels may not close to the rocks frictional strength so that failure could not be induced by the relatively small perturbation in pore pressure. Or at these depths there may be no permeable, well-oriented faults. This depth may be in close proximity to the bottom of the hole to the brittle-ductile transition, even in this relatively stable interior of the in-teraplate. This phenomenon is explained by the experimental results and geothermal data from the superdeep bore-hole. From August 21, 2000 to October 20, 2000,a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 events. Among them 237 events were of high signal-to-noise ratio, and were processed and accurately located. When the events were located, non KTB events were weeded out by Wadatis method. The standard deviation, mean and median were obtained by Jackknife's technique, and finally the events were accurately located by Gei-gers method so that the mean error is about 0.1 km. No earthquakes with focal depth greater than 9.3 km, which is nearly at the bottom of the hole, were detected. One of the explanation is that at such depths the stress levels may not close to the rocks frictional strength so that failure could not be induced by the relatively small perturbation in pore pressure. Or at these depths there may be no permeable, well-oriented faults. This depth may be in close proximity to the bottom of the hole to the brittle-ductile transition, even in this relatively stable interior of the in-teraplate. This phenomenon is explained by the experimental results and geothermal data from the superdeep bore-hole.
出处 《Acta Seismologica Sinica(English Edition)》 CSCD 2002年第6期616-627,共12页
基金 The DFG SFB 526
关键词 scientific deep drilling fluid-injection induced seismicity earthquake location Jackknife method brittle-ductile transition scientific deep drilling fluid-injection induced seismicity earthquake location Jackknife method brittle-ductile transition
  • 相关文献

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部