摘要
This is one of the applications of Part (Ⅰ), in which the angular stiffness, the lateral stiffness and the corresponding stress distributions of C_shaped bellows were calculated. The bellows was divided into protruding sections and concave sections for the use of the general solution (Ⅰ), but the continuity of the stress resultants and the deformations at each joint of the sections were entirely satisfied. The present results were compared with those of the other theories and experiments, and are also tested by the numerically integral method. It is shown that the governing equation and the general solution (Ⅰ) are very effective.
This is one of the applications of Part (Ⅰ), in which the angular stiffness, the lateral stiffness and the corresponding stress distributions of C_shaped bellows were calculated. The bellows was divided into protruding sections and concave sections for the use of the general solution (Ⅰ), but the continuity of the stress resultants and the deformations at each joint of the sections were entirely satisfied. The present results were compared with those of the other theories and experiments, and are also tested by the numerically integral method. It is shown that the governing equation and the general solution (Ⅰ) are very effective.
