期刊文献+

双层管与流体多场耦合数值模拟 被引量:3

Numerical simulation of multiphysics coupling for double-pipe and fluid
下载PDF
导出
摘要 双层管与流体耦合作用是石油石化工程中普遍存在的物理现象,采用分域耦合方法,建立双层管与管内外流体的多场耦合力学模型;根据界面位移协调和力平衡条件及温度和热流密度连续性条件,推导耦合界面信息传递方法和收敛判断准则;为解决多场耦合大规模数值计算问题,提出流体特性描述数据库和分布式协同求解方法;通过算例分析双层管与管内外流体的温度场和流场耦合、位移场和流场耦合以及弹性管多场耦合,为指导工程应用和产品研发提供理论方法. The interaction of double-pipe and fluid is general physics phenomenon in oil and petrochemical engineering.Partitioned coupling method was used to establish multiphysics coupled mechanical model of double-pipe and fluid.Based on the interface displacement compatibility and force equilibrium conditions,and the continuity boundary conditions of temperature and heat flux,information transfer method on coupling interface was derived,and convergence method was also derived.According to three types of coupling e...
出处 《大庆石油学院学报》 CAS 北大核心 2010年第5期114-121,171,共9页 Journal of Daqing Petroleum Institute
基金 国家自然科学基金项目(10672073) 黑龙江省科技计划资助项目(GZ08A505)
关键词 双层管 多场耦合 流固耦合 耦合传热 double-pipe multiphysics coupling fluid-structure interaction conjugate heat transfer
  • 相关文献

参考文献10

  • 1刘巨保,岳欠杯,李治淼,罗敏.井简内杆管柱双层接触有限元分析及应用[J].力学与实践,2009,31(2):35-39. 被引量:6
  • 2Matthias Heil,Andrew L. Hazel,Jonathan Boyle.Solvers for large-displacement fluid–structure interaction problems: segregated versus monolithic approaches[J]. Computational Mechanics . 2008 (1)
  • 3Arici M E.Heat transfer analysis for a concentric tube heat exchanger including the wall axial conduction. Heat Transfer Engineering . 2010
  • 4Rittoa T G,,Soizeb C,Sampaioa R.Non-linear dynamics of a drill-string with uncertain model of the bit-rock interaction. Interna-tional Journal of Non-Linear Mechanics . 2009
  • 5Garside R,Pattillo P D,Sathuvalli U B.Special issues in the stress analysis of casing strings in steam-injection wells:mathematical development and design. Journal SPE Drilling&Completion . 2009
  • 6Song K N,Kim Y W,Park S C.A study of FIV characteristics of a coaxial double-tube-type cross vessel for a VHTR. Journal of Nuclear Science and Technology . 2010
  • 7Tai C F,Chung J N.A direct numerical simulation of annular two-phase laminar flow and heat transfer in a circular pipe. Interna-tional Journal for Computational Methods in Engineering Science and Mechanics . 2010
  • 8Azadi M,Shariyat M.Nonlinear transient transfinite element thermal analysis of thick-walled FGM cylinders with temperature-de-pendent material properties. Meccanica . 2010
  • 9Longatte E,Verreman V,Soulib M.Time marching for simulation of fluid-structure interaction problems. Journal of Fluids and Structures . 2009
  • 10Chen Wenlih,Yang Yuching.An iterative regularization method in estimating the transient heat-transfer rate on the surface of the in-sulation layer of a double circular pipe. Energy Conversion . 2009

二级参考文献6

共引文献5

同被引文献16

  • 1李宇,邹正平,叶建,李维,周志翔,秦代斌.二维流热耦合数值模拟程序及方法研究[J].燃气涡轮试验与研究,2007,20(2):18-26. 被引量:2
  • 2张鸣远.高等工程流体力学[M].西安:西安交通大学出版社,2008.
  • 3张阿漫,戴绍仕.流固耦合动力学[M].北京:国防工业出版社,2010:5.35.
  • 4郑丹星.流体与过程热力学[M].北京:化学工业出版社,2006.
  • 5Lavooij C S,Tijsseling A S.Fluid-Structure Interaction in Liq- uid-Filled Piping Systems[J].Journal of Fluids and Struc- tures,1991,5(5) :573-595.
  • 6Zhao Ming,Ghidaoui M S.Godunov-Type Solutions for Water Hammer Flows[J].Journal of Hydraulic Engineering, 2004, 130(4) : 341-348.
  • 7Ahrem R, Hackenberg M, Post P, et al. MpCCI-Mesh BasedParallel CodeCoupling Interface[J]. Institute for Algorithms and Scientific Computing (SCAI), 2000 : 10-11.
  • 8Mpcci的体系结构图[EB/OL].http://image.baidu.corn/i?ct=5033164808Lz=0&tn=baiduimagedetail&ipn=d&word-mpcci的体系结构图,20152-7.
  • 9董非,范秦寅,姜树李,郭晨海.内燃机流固热耦合数值模拟的研究[J].汽车工程,2009,31(2):146-150. 被引量:11
  • 10孙雷,赵刚,刘华君,张世民.基于流固耦合的换热管束振动分析[J].压力容器,2011,28(8):39-43. 被引量:12

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部