期刊文献+

英国表面工程的现状及挑战 被引量:1

Current State and Challenges of UK Surface Engineering
下载PDF
导出
摘要 近期英国权威机构对英国表面工程的现状和发展作出了系统的评估报告。文中根据这些报告扼要介绍了英国表面工程的现状、面临的挑战及将来发展的机遇。15年来英国表面工程得到长足的发展,表面工程技术已应用于70%以上的终端产品。表面工程所创造的市场价值增加了2倍多。但英国表面工程面临很多挑战,如传统制造业的萎缩和日益提高的环保标准以及可持续发展的要求。英国表面工程将在航天航空、医疗器械、新能源及其它高附加值市场得到进一步发展。 Recently,some UK authorities have published their reports on the current state and challenges of UK surface engineering.This paper briefly overviewed,based on these surveys,the current state,challenges and future opportunities of UK surface engineering industry.UK surface engineering has been developed rapidly in the last 15 years as evidenced by the fact that about 70 % of the products have been surface engineered and the market value conferred by UK surface engineering has increased by more than 2 times.H...
出处 《中国表面工程》 EI CAS CSCD 北大核心 2010年第6期1-6,80,共7页 China Surface Engineering
关键词 英国表面工程 现状 挑战 未来发展 UK surface engineering current state challenges future development
  • 相关文献

参考文献12

  • 1Materials knowledge transfer network and materials UK:challenges and priorities for the UK surface engineering industry. http://www.matuk.co.uk . 2010
  • 2Artley R J,Matthews A.The UK surface engineering industry 2010. . 2010
  • 3Clarke A,Partridge A.A strategic review of the surface engineering industry in the UK. . 2006
  • 4Technology Strategy Board.Advanced materials–key technology areas 2008~2011. http://www.innovateuk.org . 2008
  • 5Williams A.Airbus SAS Industry Report:SAE G12F carbon brake oxidation working group. http://www.sae.org/events/icing/presentations/2007s2awilliams.pdf . 2007
  • 6Rickerby D S.Surface engineering in the gas turbine–current and future state. International Conference on Metallurgical Coatings and Thin Films . 2007
  • 7Sporer D,Dorfman M,Xei Let al.Processing andproperties of advanced ceramic abradable coatings. Proceedings of the 2007 International Thermal SprayConference . 2007
  • 8Secuewa–advanced wear resistant coatings. TSBfounded project‘Dissemination Event’ . 2009
  • 9Grant D M.Silicon doped hydroxyapatite thin filmsfor orthopaedic applications. Plas MAG IIIConference . 2008
  • 10Health Technologies KTN. HiPer nano workshop enhanced surface performance of medical devices . 2009

同被引文献30

  • 1王亮,李杨,张丹丹.偏压对45钢离子渗氮行为的影响[J].中国表面工程,2010,23(4):52-55. 被引量:3
  • 2龙发进,周祎,康光宇,李鑫鸿,耿漫.离子渗氮新技术的研究现状[J].热加工工艺,2007,36(6):61-64. 被引量:19
  • 3潘邻.表面改性热处理技术与应用[M].北京:机械工业出版社,2005.97-99.
  • 4Zhang Z L,Bell T.Structure and corrosion resistance of plasma nitrided stainless steel[J].Surf Eng,1985,1(2):131.
  • 5Bell T,Sun Y.Low-temperature plasma nitriding and carburising of austenitic stainless steels[J].Heat Treat Met,2002,29(3):57.
  • 6Li C X,Bell T.Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HClaqueous solutions[J].Corro Sei,2006,48(8):2036.
  • 7Dong Y,Li X,Tian L,et al.Towards long-lasting antibacterial stainless steel surfaces by combining double glow plasma silvering with active screen plasma nitriding[J].Acta Biomater,2011,7(1):447.
  • 8Belmonte T,Lefèvre L,Czerwiec T,et al.Measurements of the loss probability of nitrogen atoms versus temperature on various surfaces[J].Thin Solid Films,1999,341(1):27.
  • 9Menthe E,Rie K T.Plasma nitriding and plasma nitrocarburizing of electroplated hard chromium to increase the wear and the corrosion properties[J].Surf Coat Techn,1999,112(1):217.
  • 10Ataíde de A R P,Alves Jr Jr C,Hajek V,et al.Effects during plasma nitriding of shaped materials of different sizes[J].Surf Coat Techn,2003,167(1):52.

引证文献1

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部