摘要
根据收割机传输带圆盘式塔台底座的一般负荷情况,取其单位体,建立极坐标下的力学平衡方程和应变协调方程;经坐标变换后,得出内力与应力、应变的平衡方程,从而求出应变与内力的关系式;并引入积分塑性函数,得出了应变与积分塑性函数的关系式;同时,给出了圆盘在大小不同的载荷下,塑性区数量不同时的积分塑性函数的表达式和曲线图,以供技术人员设计时参考。
Disc under the harvester transmission tower base with the general load conditions,whichever unit body,the establishment of polar coordinates of the mechanical equilibrium equations and strain compatibility equation;by the coordinate transformation,the obtained internal force and stress and strain of the balance equation,which find the relation between strain and internal force;and the introduction of plastic integral function,integral plastic strain and obtained the relation between the function;gives the disc loads in different sizes,the number of plastic zone does not function while the expression of the integral plastic and the curve for the technical design information.
出处
《农机化研究》
北大核心
2012年第3期53-56,共4页
Journal of Agricultural Mechanization Research
基金
河南省重大科技攻关项目(82201343102)
郑州市科技攻关项目(083STRF40345-5)
关键词
圆盘式塔台底座
应变强度
积分塑性函数
线形硬化
应变协调方程
tower base disc of plastic
strain intensity
function of linear strain hardening
strain compatibility equation
normalized integral equation