期刊文献+

溶胀法测定HNBR的溶解度参数 被引量:1

Determination of Solubility Parameters of HNBR with Swelling Method
下载PDF
导出
摘要 测定了Therban2007,Therban3407,Therban4307和Therban5008 4种氢化丁腈橡胶(HNBR)的溶解度参数,并与其预测值进行了对比。结果表明,溶解度参数的测定值略小于预测值,4种不同丙烯腈含量的HNBR具有相似的溶胀性能,HNBR的溶解度参数范围均为18~22(J/cm3)1/2。溶解度参数在18~22(J/cm3)1/2的溶剂可有效地溶胀HNBR。 The solubility parameter of hydrogenated nitrile rubber(HNBR) of Therban2007,Therban3407,Therban4307 and Therban5008 were determined and compared with the predicted values.The results showed that the determined values were slightly less than the predicted values,the four kinds of HNBR with different acrylonitrile content exhibited similar swelling properties,and the range of solubility parameter of HNBR was 18~22(J/cm3)1/2.The solvents with the numerical value of solubility parameter in the range of 18~22(J/cm3)1/2 could effectively swell the HNBR.
出处 《特种橡胶制品》 2012年第5期64-67,73,共5页 Special Purpose Rubber Products
关键词 氢化丁腈橡胶 溶解度参数 溶胀性能 溶剂 HNBR solubility parameter swelling properties
  • 相关文献

参考文献11

  • 1肖风亮.Therban HNBR系列专题讲座(三) Therban HNBR的结构对其物理性能的影响[J].世界橡胶工业,2006,33(3):3-10. 被引量:3
  • 2游长江,石小华.溶解度参数预测共混物的相容性[J].高分子材料科学与工程,2001,17(1):162-165. 被引量:22
  • 3刘国杰,黑恩成,史济斌.一个新的溶解度参数[J].化工学报,1994,45(6):665-672. 被引量:18
  • 4H Magg.Stretching the elastomer envelope[].Materials World.1998
  • 5Bagley E B,Nelson T P,Scigliano J M.Three-dimensional solubility parameters for the relationship to internal pressure measurements in polar and hydrogen bonding solvent[].Paint Technol.1971
  • 6C. M. Hansen,K. Skaarup.The three dimensional solubility parameter — key to paint component affinities: III. Independent calculation of the parameter components[].Journal of Paint Technology.1967
  • 7Krevelen V DW.Properties of polymers:Their estimation andcorrelation with chemical structure[]..1997
  • 8Hansen C M.Polymer additives and solubility parameters[].Progress in Organic Coatings.2004
  • 9C. Wrana,K. Reinartz,H. R. Winkelbach.Therban (R)-the High Performance Elastomer For the New Millennium[].Macromolecular Materials and Engineering.2001
  • 10Dalgarno K W.Power transmission belt performance and failure[].Rubber Chemistry and Technology.1998

二级参考文献3

  • 1游长江.非反应性共聚物增容剂的作用[J].高分子材料科学与工程,1993,9(2):1-5. 被引量:13
  • 2骆赞椿,流体相平衡的分子热力学(第2版),1990年
  • 3Therban(R):The Influence of PolymerStructure on Physical Properties in Industrial RubberGoods.http://www.therban.com/imperia/md/content/therban/tib a001.pdf

共引文献39

同被引文献9

  • 1Claus Wrana,Klaus Reinartz, Hans R Winkelbach. Ther- ban The High Performance Elastomer for the New Millen- nium. Macromol[J]. Mater Eng,2001,286 : 657-662.
  • 2Magg H. Stretching the elastomer envelope[J]. Material World,1998,6(8) :485-487.
  • 3Cao Yuanyi, Shen Fei, Mou Haiyan, Cao Deming, Xu Haiy- an,Wu Chifei. Hydrogenated Nitrile Butadiene Rubber and Hindered Phenol Composite (I) Miscibility and Dynamic Mechanical Property[J]. Polymer Engineering and Science, 2010,10 : 2375-2381.
  • 4Hildebrand J H, Scott R L. The Solubility of Nonelectro- lyres (3 rd ed) [M]. NewYork : Reinhold, 1950.
  • 5Hansen C M. The three dimensional solubility parameter key to paint component affinities (I) Solvents, plasticizers, polymers, and resins[J]. J of Paint Technology, 1967,39 (505) : 104-117.
  • 6Hansen C M. The three dimensional solubility parameter- key to paint component affinities (II) Dyes, emulsifiers, mutual solubility and compatibility, and pigments [J]. Journal of Paint Technology, 1967,39(511) : 505-510.
  • 7Hansen C M. The three dimensional solubility parameter- key to paint component affinities (Ill) Independent calcula- tion of the parameters components [J]. Journal of Paint Technology, 1967,39(511) :511-514.
  • 8Hansen C M. Hansen Solubility Parameters: A User's Handbook[M]. 2nd Edition. CRC Press,2007.
  • 9Evans K M and Hardy J K. Predicting Solubility and Per- meation Properties of Organic Solvents in Viton Glove Ma- terial Using Hansen Solubility Parameters [J]. J Appl Polym Sci, 2004,93 : 2688-2698.

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部