期刊文献+

承压堵漏技术在AT16井的应用

Application of Mud Loss Control Under Pressure in AT16 Well
下载PDF
导出
摘要 AT16井是位于沙雅隆起阿克库勒凸起东南斜坡带的一口探井,该井在石炭系巴楚组钻遇长达261 m(5 057~5 318 m井段)的盐膏层段。由于该井盐上地层为长裸眼段,地层压力系数低,易漏,因此钻进至井深5 000 m时,应使用承压堵漏工艺技术对井身5 000 m以上的裸眼段进行先期堵漏,使地层承压能力提高,为盐膏层顺利钻进提供保障。本文对此次承压堵漏进行了分析,提出了自己的一些认识和建议。 AT16 well is a prospected well in the bossy southeast ramp region of Shaya Akekule uplift.A 261m long(5057~5318m) carbonate zone is encountered while drilling a long open hole at Bachu area in carboniferous system.Formation over carbonate zone of AT16 Well is an open hole section,and its reservoir pressure coefficient is low,it’s easy to lost circulation,so mud loss control under pressure should be used to plug open-hole formation while drilling well depth is over 5 000 m in order to improve formation pressure ability and supply support for smoothly drilling in carbonate zone.In this paper,the technology process of mud loss control under pressures was analyzed,and some suggestions were put forward.
出处 《辽宁化工》 CAS 2012年第10期1032-1033,1036,共3页 Liaoning Chemical Industry
关键词 承压堵漏 堵漏配方 地层压力 钻井液 mud loss control under pressures mud formulation for mud loss control formation pressure drilling fluid
  • 相关文献

参考文献3

二级参考文献2

共引文献60

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部