摘要
The fretting behavior of Zn-Al-Mg-RE coating prepared by high velocity arc spraying was studied for the first time in this paper.All specimens were fretted in air and 3.5%NaCl solution independently.The worn surfaces of the coating were investigated by scanning electron microscopy and X-ray energy dispersive spectroscopy.Fretting tests have shown that friction coefficient in 3.5%NaCl solution was similar to dry condition for Zn-Al-Mg-RE coating.Study of worn surfaces revealed the main mechanism in dry friction was the oxidative wear;while in 3.5%NaCl solution,the main mechanisms were delamination process and abrasive wear.
The fretting behavior of Zn-Al-Mg-RE coating prepared by high velocity arc spraying was studied for the first time in this paper.All specimens were fretted in air and 3.5%NaCl solution independently.The worn surfaces of the coating were investigated by scanning electron microscopy and X-ray energy dispersive spectroscopy.Fretting tests have shown that friction coefficient in 3.5%NaCl solution was similar to dry condition for Zn-Al-Mg-RE coating.Study of worn surfaces revealed the main mechanism in dry friction was the oxidative wear;while in 3.5%NaCl solution,the main mechanisms were delamination process and abrasive wear.
出处
《稀有金属材料与工程》
SCIE
EI
CAS
CSCD
北大核心
2012年第S1期161-163,共3页
Rare Metal Materials and Engineering
基金
973 Project(2011CB013403)
NSFC(50971132)
