期刊文献+

F35MnVN非调质钢热变形中流动应力模型 被引量:4

Model of flow stress of F35MnVN non-quenched and tempered steel during hot deformation
下载PDF
导出
摘要 采用gleeble-3800热模拟实验机对F35MnVN非调质钢进行单道次压缩实验,获得不同变形条件下的流动应力-应变曲线。根据laasraoui和Jonas所建立的方程分别对动态回复、动态再结晶两阶段建立流动应力模型,计算出F35MnVN非调质钢热变形激活能为202.9 kJ/mol。通过实验数据计算出模型中的参数,并把模型预测的值与实验所得数据进行了比较,两者吻合较好。 采用gleeble-3800热模拟实验机对F35MnVN非调质钢进行单道次压缩实验,获得不同变形条件下的流动应力-应变曲线。根据laasraoui和Jonas所建立的方程分别对动态回复、动态再结晶两阶段建立流动应力模型,计算出F35MnVN非调质钢热变形激活能为202.9 kJ/mol。通过实验数据计算出模型中的参数,并把模型预测的值与实验所得数据进行了比较,两者吻合较好。
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2012年第S1期121-124,共4页 Transactions of Materials and Heat Treatment
基金 山东省自然科学基金项目ZR2010EQ027
关键词 流动应力 动态回复 动态再结晶 激活能 flow stress dynamic recovery dynamic recrystallization activation energy
  • 相关文献

参考文献7

  • 1方剑,谢凯意,邹喜洋,袁泽喜.微合金非调质40Mn2V钢管的变形抗力研究[J].武汉科技大学学报,2009,32(3):238-241. 被引量:3
  • 2杨洪根,崔庆红.非调质钢在工程机械上的运用及评价[J].工程设计学报,2004,11(4):228-230. 被引量:11
  • 3董瀚,惠卫军,时捷,陈思联.汽车用合金结构钢进展[J].汽车工艺与材料,2004(6):16-25. 被引量:16
  • 4A. Laasraoui,J. J. Jonas.Prediction of steel flow stresses at high temperatures and strain rates[J]. Metallurgical Transactions A . 1991 (7)
  • 5Sellars C M.Modeling microstructural development during hot rolling. Journal of Materials Science . 1990
  • 6Sellars C M.Computer Modeling of Hot-working Processes. Journal of Materials Science . 1985
  • 7Laasraoui A,Jonas JJ.Recrystallization of austenite after deformation at high temperature and strain rates-analysis modeling. Metallurgical and Materials Transactions A, Physical Metallurgy and Materials Science . 1991

二级参考文献38

  • 1吴红艳,沈开照,杜林秀,刘相华,王国栋,董俊华,董杰.低成本耐候钢的高温热变形行为[J].钢铁研究学报,2006,18(10):54-58. 被引量:6
  • 2周梦雄,方剑.石油套管表面裂纹分析[J].武汉科技大学学报,2007,30(2):149-151. 被引量:7
  • 3陈贻宏,李虎兴,贾宝军,刘绍嵩.热轧管线用钢轧制工艺及数学模型[J].武汉冶金科技大学学报,1997,20(1):33-37. 被引量:2
  • 4The Association of Science and Technology. Dalian Steel Works, Collection of Papers on Non-quenched and Tempered Steel in Dalian Special Steel, 1991.
  • 5Kobe Steel Works. Non-quenched and Tempered Bar Steel.
  • 6Mitsubishi Steel Works. Direct Machine-cut Nonquenched and Tempered Steel.
  • 7Sun W P,Hawbolt E B.Comparison between static and metadynamic recrystallization-An appliciationto the hot rolling of steels[J].ISIJ Int,1 9 9 7,37(1):1 000-1 007.
  • 8Sang Hyun C,KiBbong K,Jonas J.Mathematical modeling of the recrystallization kinetics of Nb microalloyed steels[J].ISIJ Int,2001,41(7):766-773.
  • 9WJ Nam,HC Choi.High Strength Steel Wire Rod for Suspension Coil Spring [J].Wire J. Inter., 1996, (5):94-97.
  • 10C Padfield. Automotive Fasteners [J]. Advanced Materials & Process, 1998, (10) :49-53.

共引文献23

同被引文献28

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部