期刊文献+

低硅无铝中碳TRIP钢中残留奥氏体的机械稳定性 被引量:8

Mechanical stability of retained austenite in low-silicon,non-aluminum and medium-carbon TRIP steels
原文传递
导出
摘要 在GLEEBLE3500热模拟试验机上对两种TRIP(TRansformation Induced Plasticity)钢分别进行不同贝氏体温度的热处理,通过拉伸试验和X射线衍射研究钢板的性能及残留奥氏体转变。结果表明:高的原始残留奥氏体量和残奥中碳含量,可使得钢获得良好的综合性能。另外,建立起残留奥氏体随真应变的转变模型,该模型能较好的预测实验结果。 在GLEEBLE3500热模拟试验机上对两种TRIP(TRansformation Induced Plasticity)钢分别进行不同贝氏体温度的热处理,通过拉伸试验和X射线衍射研究钢板的性能及残留奥氏体转变。结果表明:高的原始残留奥氏体量和残奥中碳含量,可使得钢获得良好的综合性能。另外,建立起残留奥氏体随真应变的转变模型,该模型能较好的预测实验结果。
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2011年第S1期41-44,48,共5页 Transactions of Materials and Heat Treatment
基金 国家自然科学基金(50971137和50934011) 国家重点基础研究发展计划项目(2010CB630802)
关键词 TRIP钢 残留奥氏体 机械稳定性 TRIP steel retained austenite mechanical stability
  • 相关文献

参考文献1

二级参考文献14

  • 1ANKARA O A, WEST D R F. Physical properties of martensite and bainite [ M]. U K: Iron and Steel Institute, 1965 : 183.
  • 2ZACKAY V F, PARKER E R, FASHR D, et al. The enhancement of ductility in high-strength steels [J]. Trans Am Soc Mater, 1967, 60:252.
  • 3TAKECHI H. The progress of steel products for automotive application in Japan [ C ]// Proceedings of the International Conference on Advanced Automobile Materials. Beijing : [ s.n.] , 1997 : 1-9.
  • 4BLECK W. Using the TRIP effect - the dawn of a promising group of cold formable steels [ C ]// Proceedings of International Conference on TRIP-Added High Strength Ferrous Alloys Ghent. Belgium: [ s.n.], 2002 : 13-23.
  • 5MEYER M D, VANDERSCHUERE D,DE COOMAN B C. The influence of the substitution of Si by Al on the properties of cold rolled C-Mn-Si TRIP steels [J]. ISIJ International, 1999, 39 (8) : 813.
  • 6GUTI'MANN M, MCLEAN D. Grain boundary segregation in multi-component systems [ M]// Interfacial Segregation. Metals Park, Ohio : ASM, 1979 : 261-348.
  • 7LI L, DELAEY L, WOLLANTS P, et al. Thermodynamic analysis of the segregation of multicomponent steels [ J]. Journal Chimistry Physics, 1993, 90:305-312.
  • 8GUTTMANN M, DUMOULIN P, WAYMAN M. The thermodynamics of interactive co-segregation of phosphorus and alloying elements in iron and temperbrittle steels [J]. Metallurgy Transactions, 1982, 13A: 1693-1711.
  • 9MCLEAN D. Grain boundaries in metals [ M]. Oxford: Clarendon Press, 1957.
  • 10SUNDMAN B, JANSSON B, ANDERSSON J. The thermo-calc databank system [ J]. CALPHAD, 1985, 9 (2) :153-190.

共引文献1

同被引文献70

引证文献8

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部