期刊文献+

椭圆形颗粒堆积体模拟颗粒材料力学性能的离散元数值方法 被引量:13

A developed discrete element model NS2D for simulating mechanical properties of elliptical particles assemblages
下载PDF
导出
摘要 针对离散元中圆形颗粒模拟出的内摩擦角小于真实砂土内摩擦角的缺陷,将已有NS2D离散元程序中的圆形颗粒参量改进为椭圆形颗粒参量,形成改进的NS2D程序。介绍了改进后NS2D程序的基本力学模型,详细推导了程序中椭圆颗粒间以及椭圆颗粒与墙之间接触点的力-位移关系。利用改进后的离散元程序分别模拟了恒定围压下长短轴比例分别为1.1:1、1.4:1,孔隙比均为0.19的椭圆颗粒堆积体的双轴试验,所得的内摩擦角在真实砂土的内摩擦角范围之内,且其应力特征与已有成果吻合良好,证明了改进后的NS2D离散元程序能够模拟分析真实砂土的力学性能。 针对离散元中圆形颗粒模拟出的内摩擦角小于真实砂土内摩擦角的缺陷,将已有NS2D离散元程序中的圆形颗粒参量改进为椭圆形颗粒参量,形成改进的NS2D程序。介绍了改进后NS2D程序的基本力学模型,详细推导了程序中椭圆颗粒间以及椭圆颗粒与墙之间接触点的力-位移关系。利用改进后的离散元程序分别模拟了恒定围压下长短轴比例分别为1.1:1、1.4:1,孔隙比均为0.19的椭圆颗粒堆积体的双轴试验,所得的内摩擦角在真实砂土的内摩擦角范围之内,且其应力特征与已有成果吻合良好,证明了改进后的NS2D离散元程序能够模拟分析真实砂土的力学性能。
出处 《岩土力学》 EI CAS CSCD 北大核心 2011年第S1期713-718,共6页 Rock and Soil Mechanics
基金 国家自然科学基金资助(No.10972158) 国家杰出青年基金资助(No.51025932)
关键词 离散单元法 椭圆颗粒 力学模型 验证 discrete element method elliptical particles mechanical model validation
  • 相关文献

参考文献16

  • 1Itasca Consulting Group.User’’’’’’’’s manual:PFC2D-particle flow code in 2 dimensions. . 2004
  • 2Itasca Consulting Group.User’’’’’’’’s manual:PFC3D-particle flow code in 3 dimensions. . 2004
  • 3MATTHEW R KOVAL,,OVALPLOT.Programs for analyzing dense particle assemblies with the discrete elementmethod. http://faculty.up.edu/kuhn/oval/doc/oval_0618 . 2009
  • 4TING J M,,KHWAJA M,MEACHUM L R,et al.An ellipse-based discrete element model for granular materials. International Journal for Numerical and Analytical Methods in Geomechanics . 1993
  • 5J. M. Ting,L. R. Meechum,J. D. Rowell.Effect of particle shape on the strength and deformation mechanism of ellipse-shaped granular assemblages. Computer Engineering . 1995
  • 6Xiao S L.Short communication contact detection algorithms for three Dimensional ellipsoids in discrete element modeling. International Journal for Numerical and Analytical Methods in Geomechanics . 1995
  • 7Rothenburg L,Bathurst R J.Micromechanical features of granular assemblies with planar elliptical particles. Geotechnique . 1992
  • 8G. Mustoe,M. Miyata.Material flow analyses of noncircular-shaped granular media using discrete element methods. Journal of Engineering Mechanics Division ASCE . 2001
  • 9JIANG M J,KONRAD J M,LEROUEIL S.An efficient technique for generating homogeneous specimens for DEM studies. Computersand Geotechnics . 2003
  • 10M. Oda,S. Nemat-Nasser,J. Konishi.Stress-induced anisotropy in granular masses. Soils and Foundations . 1985

同被引文献155

引证文献13

二级引证文献62

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部