Study on Absorption Rate by Eccentric Mechanical Stirring in Gas Injection Refining for Iron and Steel Making

In gas injection refining processes, a great amount of gas is injected into molten metal in short time, so that very large bubbles are inevitably formed. Wide dispersion of small bubbles in the bath is indispensable for high refining efficiency. Eccentric mechanical stirring with unidirectional impeller rotation was tested using a water model for pursuing better bubble disintegration and dispersion. Absorption rate are used to research on the influence law of the bubble dispersion and disintegration and gas-liquid absorption by the influence of, rotation mode, rotation speed and gas flow rate. Compared to the experimental results of absorption rate under eccentric stirring and centric stirring ,provide the scientific experimental and theoretical guidance for high-temperature experiment of hot metal desulfurization .According to experimental and theoretical analysis, this paper has studied various factors effecting on gas absorption process and volumetric mass transfer coefficient using the system of CO2-NaOH-H2O.The results show that:the volumetric mass transfer coefficient and absorption efficiency of CO2 can be increased under eccentric stirring mode, Because bubble disperse quickly with eccentric mechanical stirring, which results in promoting complete reaction between CO2 and NaOH, and improving the mass transfer coefficient and absorption. Volumetric mass transfer coefficient and efficiency of CO2 increase with the increasing rotation speed under the condition of eccentric stirring .But volumetric mass transfer coefficient and efficiency of CO2 decrease with the increasing rotation speed under the condition of centric stirring.