Mechanical Properties and Biocompatibility of Epoxy Resin/Polytetrafluorethylene Coated TiNi Arch Wires

Mechanical Properties and Biocompatibility of Epoxy Resin/Polytetrafluorethylene Coated TiNi Arch Wires

下载PDF

导出

摘要 Epoxy resin/polytetrafluorethylene coating TiNi arch wires have been fabricated by dipping method.The vickers hardness,adhesion force,the maximum static friction force and biocompatibility also have been examined.The results show that the vickers hardness,adhesion force and the maximum static friction force increase with the increase of the content of epoxy resin.And the epoxy resin/polytetrafluorethylene coatings are nontoxic. Epoxy resin/polytetrafluorethylene coating TiNi arch wires have been fabricated by dipping method.The vickers hardness,adhesion force,the maximum static friction force and biocompatibility also have been examined.The results show that the vickers hardness,adhesion force and the maximum static friction force increase with the increase of the content of epoxy resin.And the epoxy resin/polytetrafluorethylene coatings are nontoxic.

作者邵玶蔡伟

机构地区 School of Materials Physics & Chemistry School of Orthodontic Aesthetics

出处《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2009年第S1期100-102,共3页 武汉理工大学学报（材料科学英文版）

关键词 TiNi arch wires epoxy resin polytetrafluorethylene mechanical properties BIOCOMPATIBILITY TiNi arch wires epoxy resin polytetrafluorethylene mechanical properties biocompatibility

分类号 TG17.4 [金属学及工艺—金属表面处理]

引文网络
相关文献

参考文献1

1李明高,孙大千,邱小明,孙德新,殷世强.温度对医用TiNi形状记忆合金丝微观组织和力学行为的影响[J].稀有金属材料与工程,2007,36(6):998-1001. 被引量：7

二级参考文献13

1高静,杨冠军,杨宏进,杨华斌,曹继敏.热处理对医用TiNi细丝显微组织及形状记忆效应的影响[J].稀有金属材料与工程,2005,34(2):299-302. 被引量：12
2李明高,邱小明,孙大千,刘卫红.TiNi形状记忆合金与不锈钢焊接接头性能比较[J].焊接,2005(3):17-20. 被引量：5
3黄兵民,王永前,程建霞,赵连城.近等原子比NiTi形状记忆合金的超弹性[J].中国有色金属学报,1996,6(4):136-139. 被引量：20
4吴杏芳,陈清,柯俊.TiNi合金相变的原位观察[J].电子显微学报,1997,16(3):277-283. 被引量：2
5Gu Hanqing(顾汉卿)，Xu Guofeng(徐国风)．Biomedicine Materials Science(生物医学材料学)[M]．Tianjin：Tianjin Science and Technology Publishers，1993
6Pohunkova H, Adam M. Biomaterials[J], 1995, 16:67
7Otsuka K, Wayman C M. Shape Memory Materials[M]. London: Cambridge University Press, 1998
8Qiu Xiaoming, Sun Daqian, Li Minggao. Trans Nonferrous Met Soc China[J], 2004, 14(3): 475
9Li M G, Sun D Q, Li X M. Materials Science and Engineering A[J], 2006, 424:17
10Hsu Y H, Wang S K, Chen C. Metallurgical and Materials Transactions A[J], 2001, 32A(3): 569

共引文献6

1贺志荣,王永善,刘艳,王启,杨军.不同加工态Ti-Ni基形状记忆合金相变、形变特性研究进展[J].材料导报,2009,23(17):80-84. 被引量：1
2蔡继峰,贺志荣,王永善,刘艳.退火态Ti-49.8Ni形状记忆合金的组织及性能研究[J].热加工工艺,2009,38(20):122-125.
3刘艳,贺志荣,王芳,杨军.退火工艺对Ti-50.8Ni形状记忆合金相变和低温形变特性的影响[J].热加工工艺,2010,39(18):158-162. 被引量：4
4邵玶,隋解和,冯雪,蔡伟.TiNi合金牙弓丝表面环氧树脂/聚四氟乙烯涂层的组织结构与性能[J].稀有金属材料与工程,2012,41(5):822-825. 被引量：8
5邵明增,崔春娟,杨洪波.医用NiTi形状记忆合金表面氧化改性研究进展[J].材料导报,2018,32(7):1181-1186. 被引量：4
6张琰,何瑞博,吴焘,郝泽泽,罗书轩,张文彦.胆管支架及其涂层材料制备技术研究进展[J].稀有金属材料与工程,2022,51(8):3121-3128. 被引量：2

1ZhangXinping,YuSirong,ZhangXuejun,LaoFengxue,LiuYaohui,LiuZhonghui,HeZhenming.Evaluation of Biocompatibility on Ti-Fe-Mo-Mn-Nb-Zr alloy with Ce[J].Journal of Rare Earths,2004,22(2):287-287.
2Baolong Zheng1,Li Sun2,Ruichen An2,Jin Wang1,Weichang Zhu1(l Material Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China2 Tangshan iron and Steel Co. Ltd., Tangshan 063000, China).Force Parameter Model of 3-Roll Mills for Continuous Cold Rolling Wires[J].International Journal of Minerals,Metallurgy and Materials,1999,13(4):292-295.
3Wei WU,Xinjie LIU,Huimin HAN,Dazhi YANG,Shoudong LU.Electropolishing of NiTi for Improving Biocompatibility[J].Journal of Materials Science & Technology,2008,24(6):926-930. 被引量：4
4F.Lu,W.Y.Shen,J.G. Li and W.D. Zhen(Beijing Institute of Aeronautical Materials,Beijing 100095,).GALVANIC　CORROSION　BETWEEN　GRAPHITE　EPOXY　COMPOSITE　MATERIALS　AND　LY12CZ　ALUMINUM　ALLOY[J].Acta Metallurgica Sinica(English Letters),1996,9(6):669-673. 被引量：2
5Udo Schnell.医疗技术领域所需的刀具和夹具[J].现代制造,2016,0(39):24-24.
6Y.D. Liu,Y.D. Zhang,A. Tidul,L. Zuo.<110> Fiber Texture Evolution of Ferrite Wires during Drawn-torsion and Drawn-annealing-torsion Process[J].Journal of Materials Science & Technology,2012,28(11):1010-1014. 被引量：2
7Chen, Jianrong,Hu, Jianhua,Peng, Chaoqun(Department of Chemistry,Zhe jiang Normal University,Jinhua 32100 4).ADSORPTION OF GALLIUM WITH N_503LEVEXTREL RESIN[J].中国有色金属学会会刊：英文版,1994,4(3):36-40.
8加拿大：研究特殊金属涂层提高汽车镁合金抗腐蚀性[J].表面工程资讯,2012,12(3):35-35.
9加企获资研究汽车用稀土镁合金抗腐蚀性能[J].特种铸造及有色合金,2012,32(4):366-366.
10加企获资研究汽车用稀土镁合金抗腐蚀性[J].稀土,2012,33(3):85-85.

Journal of Wuhan University of Technology(Materials Science)

2009年第S1期

浏览历史

内容加载中请稍等...

Mechanical Properties and Biocompatibility of Epoxy Resin/Polytetrafluorethylene Coated TiNi Arch Wires

参考文献1

二级参考文献13

共引文献6

相关作者

相关机构

相关主题

浏览历史