期刊文献+

Uniaxial tension and tensile creep behaviors of EPS 被引量:2

Uniaxial tension and tensile creep behaviors of EPS
下载PDF
导出
摘要 The mechanical behavior of EPS(Expanded polystyrene) with three densities at room temperature and under tension loading was studied.The results show that EPS material is characterized by brittle behavior in the tension tests,and tensile properties of EPS increase with the increase of density.Volume fraction has no a significant effect on the modulus of these foams.The tensile creep strain increases with stress for EPS with same density,indicating that the creep behavior is of the stress dependency.And the creep behavior of EPS exhibits density dependency,which the creep strain decreases with densities for a fixed stress value.Moreover the creep behavior under the constant tension load is well in coincidence with the three-parameter solid model. The mechanical behavior of EPS (Expanded polystyrene) with three densities at room temperature and under tension loading was studied. The results show that EPS material is characterized by brittle behavior in the tension tests, and tensile properties of EPS increase with the increase of density. Volume fraction has no a significant effect on the modulus of these foams. The tensile creep strain increases with stress for EPS with same density, indicating that the creep behavior is of the stress dependency. And the creep behavior of EPS exhibits density dependency, which the creep strain decreases with densities for a fixed stress value. Moreover the creep behavior under the constant tension load is well in coincidence with the three-parameter solid model.
出处 《Journal of Central South University》 SCIE EI CAS 2008年第S1期202-205,共4页 中南大学学报(英文版)
基金 Project(06C243) supported by Scientific Research Fund of Hunan Provincial Education Department,China
关键词 EPS mechanical BEHAVIOR TENSILE CREEP DENSITY EPS mechanical behavior tensile creep density
  • 相关文献

参考文献12

  • 1Ying-an Kang,Jun-yan Zhang,Jia-cai Tan.Compressive behavior of aluminum foams at low and high strain rates[J]. Journal of Central South University of Technology . 2007 (1)
  • 2I. J. Gnip,V. I. Kersulis,S. I. Vaitkus.Predicting the Deformability of Expanded Polystyrene in Long-Term Compression[J]. Mechanics of Composite Materials . 2005 (5)
  • 3Duskov M.Materials research on EPS20and EPS15under representative conditions in pavement struct ures. Geotextiles and Geomembrances . 1997
  • 4GNIP I J,KERSULIS V J,VAITKUS S J.Predicting the deformability of expanded polystyrene in long-term compression. Mech Compos Mater . 2005
  • 5GNIP I Y,VAITKUS S,KERSULIS V,VEJELIS S.Long-term prediction of compressive creep development in expanded polystyrene. Polymer Testing . 2008
  • 6Gibson,L. J.,Ashby,M. F. Cellular Solids: Structures and Properties . 1997
  • 7KANG Y A,ZHANG J Y,TAN J C.Compressive behavior of aluminum foams at low and high strain rates. Journal of Central South University of Technology English Edition . 2007
  • 8Simone A E,Gibson L J.The effects of cell face curvature and corrugations on the stiffness and strength of metallic foams. Acta Materialia . 1998
  • 9Zhang Chunyuan.Viscoelastic Fracture Mechanics. . 2006
  • 10Thompsett D J,Walker A.Design and Construction of Expanded Polystyrene Embankments Practical Design Methods and Used in the United King-dom. Construction and Building Materials . 1995

同被引文献24

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部