FORECAST OF BREAKING LENGTH OF SIDE CURLING SHORT SPIRAL CHIPS 被引量：1

FORECAST OF BREAKING LENGTH OF SIDE CURLING SHORT SPIRAL CHIPS

导出

摘要 The theoretical formula for estimating the side curling short spiral chips is simplified. On the basis of experiment, a practical formula for forecasting the chip breaking length is obtained. It is proved by experiment that the result from the practical formula fits well with that from the experiments. The theoretical formula for estimating the side curling short spiral chips is simplified. On the basis of experiment, a practical formula for forecasting the chip breaking length is obtained. It is proved by experiment that the result from the practical formula fits well with that from the experiments.

作者 Li Zhenjia Qu Guimin Xu Yihong Tao Haihong Department of Mechanical Engineering, Harbin University of Science and Technology

出处《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 1999年第4期297-302,共6页 中国机械工程学报（英文版）

关键词 Side curling Short spiral chip Chip breaking Side curling Short spiral chip Chip breaking

分类号 TH113 [机械工程—机械设计及理论]

引文网络
相关文献

同被引文献5

1许小村,付德利,陈洪君,李振加.切屑变形的微观研究[J].哈尔滨理工大学学报,1997,2(6):1-4. 被引量：1
2杨勇,方强,柯映林,董辉跃.基于有限元模拟的钛合金锯齿状切屑形成机理[J].浙江大学学报（工学版）,2008,42(6):1010-1014. 被引量：12
3严鲁涛,袁松梅,刘强.绿色切削高强度钢的刀具磨损及切屑形态[J].机械工程学报,2010,46(9):187-192. 被引量：28
4严复钢,何耿煌,刘献礼.极端重载条件下高效切削刀具技术[J].哈尔滨理工大学学报,2011,16(6):11-16. 被引量：15
5王祖唐.金属塑性变形极限判据[J].应用力学学报,2002,19(2):104-106. 被引量：4

引证文献1

1LIU Xianli,HE Genghuang,YAN Fugang,CHENG Yaonan,LIU Li.Large Chip Production Mechanism under the Extreme Load Cutting Conditions[J].Chinese Journal of Mechanical Engineering,2015,28(2):343-352. 被引量：5

二级引证文献5

1何耿煌,张守全,邹伶俐.难加工材料-不锈钢高效车削技术及其刀具研究[J].组合机床与自动化加工技术,2015(11):25-29. 被引量：6
2何耿煌.切屑折断分析及其直接断屑技术的研究[J].哈尔滨理工大学学报,2016,21(1):6-12. 被引量：9
3何耿煌,邹伶俐,李凌祥,吴冲浒.不锈钢可加工性分析及其高效切削刀具技术研究[J].机床与液压,2016,44(13):57-62. 被引量：8
4何耿煌,李凌祥,邹伶俐,程程,刘献礼.可转位车削刀具结构设计的工程技术研究[J].哈尔滨理工大学学报,2017,22(4):110-115. 被引量：8
5陈再发.汽车刹车制动盘形状优化设计[J].哈尔滨理工大学学报,2018,23(3):128-132. 被引量：3

1Present Situation and Forecast for Development of Rubber Injection Press[J].橡塑机械时代,2007,19(2):9-13.
2Present Situation and Forecast for China Rubber Machinery[J].橡塑机械时代,2007,19(2):1-6.
3WANG Jian,PAN Kai-long,SHEN Yun-feng,LI Jie.Design and Application of an Expert System for Equipment Maintenance and Forecast[J].International Journal of Plant Engineering and Management,2007,12(1):49-54.
4ZHANG Huai-liang, TAN Guanjun, QIU Xian-yan College of Mechanical and Electrical Engineering,Central South University Changsha 410083, P R. China.A New Method for Forecasting the Life Test Data of Mechanical Products[J].International Journal of Plant Engineering and Management,2001,6(2):57-64.
5郭灿彬,王时龙,李强,陈文,聂建林.刀具订单自动生成系统的研发[J].组合机床与自动化加工技术,2006(2):103-106. 被引量：2
6DIAO YanFang & WANG BenDe School of Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China.Risk analysis of flood control operation mode with forecast information based on a combination of risk sources[J].Science China(Technological Sciences),2010,53(7):1949-1956. 被引量：10
7JIANG Xiaohui1, LIU Changming1,2, WANG Yu3 & WANG Hongrui1 1. Beijing Normal University, Beijing 100875, China,2. Institute of Geographic Science and Natural Resources, Chinese Academy of Sciences, Beijing 100101, China,3. Reconnaissance, Planning, Design and Research Institute, YRCC, Zhengzhou 450003, China.The study on Sanmenxia annual flow forecasting in the Yellow River with mix regression model[J].Science China(Technological Sciences),2004,47(z1):118-126.
8陈士玮,李柱国,周守西.Application of non-equal interval GM(1,1)model in oil monitoring of internal combustion engine[J].Journal of Central South University of Technology,2005,12(6):705-708. 被引量：2
9XI ShuFeng1, WANG BenDe1, LIANG GuoHua1, LI XueSen2 & LOU LiLi3 1 School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024, China,2 Management Bureau of Tanghe Reservoir, Liaoyang 111000, China,3 Institute of Dalian Water Science, Dalian 116013, China.Inter-basin water transfer-supply model and risk analysis with consideration of rainfall forecast information[J].Science China(Technological Sciences),2010,53(12):3316-3323. 被引量：12
10SUN XiaoLiang1,2, JIA LiMin1, DONG HongHui1, QIN Yong1 & GUO Min3 1State Key Laboratory of Rail Traffic Control and Safety, Beijing Jiaotong University, Beijing 100044, China,2School of Traffic and Transportation, Beijing Jiaotong University, Beijing 100044, China,3Beijing Traffic Management Bureau, Beijing 100044, China.Urban expressway traffic state forecasting based on multimode maximum entropy model[J].Science China(Technological Sciences),2010,53(10):2808-2816. 被引量：6

Chinese Journal of Mechanical Engineering

1999年第4期

浏览历史

内容加载中请稍等...

FORECAST OF BREAKING LENGTH OF SIDE CURLING SHORT SPIRAL CHIPS 被引量：1

同被引文献5

引证文献1

二级引证文献5

相关作者

相关机构

相关主题

浏览历史