摘要
In situ, compatibilization of low density polyethylene (LDPE) (30%) and nylon-6 (70%) blends through one-step reactive extrusion using t-BuOOH as an initiator and low molecular weight interfacial agents as compatibilizers was studied. The compatibilizer contained a long chain hydrocarbon, double bond and two polar functional groups which was capable of reacting with both LDPE and nylon-6 in the presence of initiator to form a copolymer at the interface of the two polymer phases. The extruded blends exhibited significant enhancement in their compatibility based on morphological, thermal analysis and mechanical studies. The effect of the hydrocarbon chain length and structure of the functional group of the compatibilizer was also examined. It was found that blends prepared by using the compatibilizer containing longer hydrocarbon chain and amide group had better mechanical properties.
In situ, compatibilization of low density polyethylene (LDPE) (30%) and nylon-6 (70%) blends through one-step reactive extrusion using t-BuOOH as an initiator and low molecular weight interfacial agents as compatibilizers was studied. The compatibilizer contained a long chain hydrocarbon, double bond and two polar functional groups which was capable of reacting with both LDPE and nylon-6 in the presence of initiator to form a copolymer at the interface of the two polymer phases. The extruded blends exhibited significant enhancement in their compatibility based on morphological, thermal analysis and mechanical studies. The effect of the hydrocarbon chain length and structure of the functional group of the compatibilizer was also examined. It was found that blends prepared by using the compatibilizer containing longer hydrocarbon chain and amide group had better mechanical properties.
