SOLIDIFYING　STRUCTURES　OF　Al_2O_3　SHORT　FIBER／Al－Si　ALLOY　MATRIX　COMPOSITE　PREPARED　BY　SQUEEZE　CASTING 被引量：2

SOLIDIFYING STRUCTURES OF Al_2O_3 SHORT FIBER/Al-Si ALLOY MATRIX COMPOSITE PREPARED BY SQUEEZE CASTING

下载PDF

导出

摘要ＳＯＬＩＤＩＦＹＩＮＧＳＴＲＵＣＴＵＲＥＳＯＦＡｌ_２Ｏ_３ＳＨＯＲＴＦＩＢＥＲ／Ａｌ－ＳｉＡＬＬＯＹＭＡＴＲＩＸＣＯＭＰＯＳＩＴＥＰＲＥＰＡＲＥＤＢＹＳＱＵＥＥＺＥＣＡＳＴＩＮＧ￥Ｚｈａｎｇ，Ｓｉｑｉ；Ｈｕａｎｇ，Ｊｉｎｓｏｎｇ；Ｓｈｅｎ，Ｊｉａｎ；... Al2O3 short fiber/Al-Si alloy matrix composite was prepared by squeeze casting. Solidifying structures of the composite were investigated. Results showed that primary silicon and eutectic silicon grains in the composite are obviously refined.

作者 Zhang, Siqi Huang, Jinsong Shen, Jian Lu, Bin Xu, Guofu

机构地区 Central South Univ of Technology

出处《中国有色金属学会会刊：英文版》 EI CSCD 1995年第3期133-135,共3页 Transactions of Nonferrous Metals Society of China

关键词 composite SHORT FIBER AL-SI alloy solidifying STRUCTURES SQUEEZE CASTING composite, short fiber, Al-Si alloy, solidifying, structures, squeeze, casting

分类号 TG146.21 [金属学及工艺—金属材料]

引文网络
相关文献

同被引文献3

1王浩伟,商宝禄,周尧和.液相法制造C/Al复合材料[J].航空学报,1993,14(8). 被引量：3
2Chu, Shuangjie, Wu, Renjie.RELATIONS BETWEEN INTERFACE OF CF/Al-4.5 Cu COMPOSITE AND SOLIDIFICATION PROCESSING[J].中国有色金属学会会刊：英文版,1997,7(2):133-137. 被引量：1
3李超,丘哲明,刘建超.碳布复合材料力学性能研究[J].纤维复合材料,2003,20(4):23-24. 被引量：4

引证文献2

1张云鹤,武高辉,陈国钦,修子扬,张强,王春雨.Microstructure and mechanical properties of 2D woven Gr_f/Al composite[J].中国有色金属学会会刊：英文版,2006,16(A03):1509-1512. 被引量：2
2钟国策.电声产品设计与制造的探讨[J].电声技术,2002,26(4):39-41.

二级引证文献2

1张云鹤,武高辉.Interface and thermal expansion of carbon fiber reinforced aluminum matrix composites[J].Transactions of Nonferrous Metals Society of China,2010,20(11):2148-2151. 被引量：12
2王忠远,蔡长春,王振军,熊博文,杨伟,徐志锋,余欢.三维角联锁机织铝基复合材料面内拉伸力学行为与失效机制[J].复合材料学报,2021,38(9):2989-2999. 被引量：7

1Rich Jacques.Continuous squeeze casting process by mass production[J].China Foundry,2006,3(4):258-262.
2Zhang, Siqi, Yin, Zhimin, Shen, Jian, Lu, Bin, Liang, Ying.MECHANICAL　PROPERTIES　AND　MICROSTRUCTURES　OF　Al-Mg-Li-Zr　ALLOYS-CONTAINING　SILVER[J].中国有色金属学会会刊：英文版,1994,4(4):78-82.
3刘祖岩,张锦升,霍文灿.Heat Transfer at Metal-mold Interface During Squeeze Casting　[J].Journal of Harbin Institute of Technology(New Series),1996,3(3):82-84.
4LI Chen-xi,SAN Jing-chao,XU Na,CAO Liang,BAI Yan-hua,LI Rong-de.Research on the squeeze cast technology of the castings with large ratio of height to thickness[J].China Foundry,2005,2(4):264-267. 被引量：1
5X.J.Xu,D. Zhang,Z.L. Shi,C.Z.Zhao and R.J. Wu (State Key Laboratory of Metal Matrir Composites, Shanghai Jiaotong University, Shanghai 200030, China).HIGH STRAIN RATE SUPERPLASTICITY IN A SiC_w/2024Al COMPOSITE MADE BY SQUEEZE CASTING[J].Acta Metallurgica Sinica(English Letters),1998,11(4):275-280. 被引量：4
6王春艳,吴昆,郑明毅.Hot deformation behavior and processing map of squeeze cast ZK60 magnesium alloy[J].中国有色金属学会会刊：英文版,2006,16(A03):1758-1761. 被引量：1
7廖慧敏,龙思远,郭存宝,朱志兵.Effect of Ce-rich misch metal addition on squeeze cast microstructure and mechanical properties of AZ81 alloy[J].中国有色金属学会会刊：英文版,2008,18(A01):44-49. 被引量：2
8李义春,尹丽娟,安希墉.Manufacture and Properties of SiC(p)/AI Composites Made by Squeeze Casting[J].Rare Metals,1993,12(4):308-311.
9Xin-ping Hu,Li Fang,Jun-xiang Zhou,Xue-zhi Zhang,Henry Hu.Characterization and kinetic modeling of secondary phases in squeeze cast Al alloy A380 by DSC thermal analysis[J].China Foundry,2017,14(2):98-107. 被引量：1
10Xuezhi Zhang Meng Wang Zhizhong Sun Henry Hu.Section thickness-dependent tensile properties of squeeze cast magnesium alloy AM60[J].China Foundry,2012,9(2):178-183.

中国有色金属学会会刊：英文版

1995年第3期

浏览历史

内容加载中请稍等...

SOLIDIFYING　STRUCTURES　OF　Al_2O_3　SHORT　FIBER／Al－Si　ALLOY　MATRIX　COMPOSITE　PREPARED　BY　SQUEEZE　CASTING 被引量：2

同被引文献3

引证文献2

二级引证文献2

相关作者

相关机构

相关主题

浏览历史

SOLIDIFYING STRUCTURES OF Al_2O_3 SHORT FIBER／Al－Si ALLOY MATRIX COMPOSITE PREPARED BY SQUEEZE CASTING 被引量：2

同被引文献3

引证文献2

二级引证文献2

相关作者

相关机构

相关主题

浏览历史

SOLIDIFYING　STRUCTURES　OF　Al_2O_3　SHORT　FIBER／Al－Si　ALLOY　MATRIX　COMPOSITE　PREPARED　BY　SQUEEZE　CASTING 被引量：2