摘要
To look for the optimum cutting speed, the tungsten carbide tipped saw was used asan example in this paper. And then, on the basis of the experimental results and theoretical calculation,the equations of tool life was introduced, and as an example, the minimum cost and maximum production cutting speed When the particleboards were cut by circulax saw, were obtained.
To look for the optimum cutting speed, the tungsten carbide tipped saw was used asan example in this paper. And then, on the basis of the experimental results and theoretical calculation,the equations of tool life was introduced, and as an example, the minimum cost and maximum production cutting speed When the particleboards were cut by circulax saw, were obtained.
