摘要
An expeditious method for ascertaining species between black bear (Selenarctos thibetanus G. cuiver) and brown bear (Ursus arctos Linnaeus) was developed using tooth measurements from previously identified specimens. The measurement and analysis on 18 tooth measurement indexes (i.e. T1. Length of Pm1-Pm4, T2. L. of M1-M3, T3. M1L., T4. M1 width, T5. M2L., T6. M2W., T7.M3L., T8. M3W., T9. L. of C1 alveolus, T10. W. of C1 alveolus, T11. L. of C1-M2, T12. L. of Pm4 M2,T13.M1L., T14. M1W., T15. M2L., T16. M2W., T17.L. of C1 alveolus, T18. W. of C1 alveolus) of 59 skulls (black bears 25, brown bears 34) indicates that there are significant or the most significant difference between two species in every indexes, however T1, T9, T10, T17 and T18 are not suitable for species discriminator because of their high percent of overlap. The efficient species discriminators and standards (mm) are as follows T2(63.0), T3(22.0), T4(10.2), T5(23.8), T6(13.6), T7(18.0), T8(13.5), T11(110.0),T12(66.0), T13(20. 1), T14(15.8), T15(33.0) and T16(17.3). Those who are less than or equal to standard are classified to black bear, the others are brown bear. The method is very convenient and useful with high reliability. Their lowest accuracy percent are 95.0%, most of them over 97%. Different indexes will be chosen refer to the degree of specimen destroyed.
An expeditious method for ascertaining species between black bear (Selenarctos thibetanus G. cuiver) and brown bear (Ursus arctos Linnaeus) was developed using tooth measurements from previously identified specimens. The measurement and analysis on 18 tooth measurement indexes (i.e. T1. Length of Pm1-Pm4, T2. L. of M1-M3, T3. M1L., T4. M1 width, T5. M2L., T6. M2W., T7.M3L., T8. M3W., T9. L. of C1 alveolus, T10. W. of C1 alveolus, T11. L. of C1-M2, T12. L. of Pm4 M2,T13.M1L., T14. M1W., T15. M2L., T16. M2W., T17.L. of C1 alveolus, T18. W. of C1 alveolus) of 59 skulls (black bears 25, brown bears 34) indicates that there are significant or the most significant difference between two species in every indexes, however T1, T9, T10, T17 and T18 are not suitable for species discriminator because of their high percent of overlap. The efficient species discriminators and standards (mm) are as follows T2(63.0), T3(22.0), T4(10.2), T5(23.8), T6(13.6), T7(18.0), T8(13.5), T11(110.0),T12(66.0), T13(20. 1), T14(15.8), T15(33.0) and T16(17.3). Those who are less than or equal to standard are classified to black bear, the others are brown bear. The method is very convenient and useful with high reliability. Their lowest accuracy percent are 95.0%, most of them over 97%. Different indexes will be chosen refer to the degree of specimen destroyed.
