期刊文献+

Fatigue Behaviour of Tubular Joints Made of China-Made Platform Steel 被引量:1

Fatigue Behaviour of Tubular Joints Made of China-Made Platform Steel
下载PDF
导出
摘要 In China, a nationwide research program on fatigue behaviour of tubular joints made of China-made platform steel was carried out from 1983 to 1990, which was set by the Tubular Joint Research Committee for Offshore Structures (TJCOS) of China. This paper gives an outline of the basic properties of the China-made platform steel and fatigue test of tubular joints, including test specimens, test particulars and test results. A p-S-N curve based on the test results was established which reveals that the fatigue strength of tubular joints is fairly good. The thickness effect and effect of corrosion on fatigue strength in sea water are briefly discussed. In China, a nationwide research program on fatigue behaviour of tubular joints made of China-made platform steel was carried out from 1983 to 1990, which was set by the Tubular Joint Research Committee for Offshore Structures (TJCOS) of China. This paper gives an outline of the basic properties of the China-made platform steel and fatigue test of tubular joints, including test specimens, test particulars and test results. A p-S-N curve based on the test results was established which reveals that the fatigue strength of tubular joints is fairly good. The thickness effect and effect of corrosion on fatigue strength in sea water are briefly discussed.
出处 《China Ocean Engineering》 SCIE EI 1992年第1期103-110,共8页 中国海洋工程(英文版)
关键词 load frequency number of cycles survivablity stress range z-direction steel load frequency, number of cycles, survivablity, stress range, z-direction steel
  • 相关文献

同被引文献13

  • 1Lourenssen A A,Dijkstra O D.Fatigue tests on large post weld heat treated and as welded tubular T-joints. Offshore Technology Confer- ence . 1982
  • 2Wylde J G.Fatigue tests on welded tubular T-joints with equal brace and chord diameters. Offshore Technology Conference 4527 . 1983
  • 3Agerskov H,Pertersen R I,Martinez L L.An investigation on fatigue in high-strength steel offshore structures. Welding in the World . 1988
  • 4Sonsino C M,Umbach R.Hybrid design concept using high-strengthcast steel inserts for tubular joints of offshore structures. Fatigue and Fracture of Engineering Materials and Structures . 1996
  • 5Hara M,Kawai Y,Narumoto A, et al.Corrosion fatigue strength of 490 MPa class high-strength steels produced by the thermo-me- chanical control process. OTC 5311 . 1986
  • 6Udomworarat P,Miki C,Ichikawa, A, et al.Fatigue performance of composite tubular K-joints for truss type bridge. Structural Eng/Earthquake Eng, JSCE . 2002
  • 7Zhao X L,Herion S,Packer J A, et al.Design Guide for Circular and Rectangular Hollow Section Welded Joints under Fatigue Loading. CIDET . 2000
  • 8van Wingerde A M,Puthli R S,Wardenier J, et al.Design recom- mendations and commentary regarding the fatigue behaviour of hol- low section joints. Proceedings of the 2nd International Offshore and Polar Engineering Conference . 1992
  • 9Lourenssen A A,,Dijkstra O D.Fatigue tests on large post weld heat treated and as welded tubular T-joints. Offshore Technology Confer- ence . 1982
  • 10van Wingerde A M,van Delft D R V,Wardenier J,Packer J A.Scale Effects on the Fatigue Behavior of Tubular Structure. International Conference on performance of Dynamically Loaded Welded Structures . 1997

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部