摘要
In order to make the fracture cross-section of rock smooth in controlled cutting-blast, generally, two V-shape-notches on the inner wall of a shot hole are notched in symmetry along the design direction. A V-shape notch approximately be considered as V-shape-fracture under certain condition. This paper gave the complex stress function of preformed V-shape-fracture under a blasting load. The stress field and displacement field at the tip of a preformed V-shape-fracture were derived with Westergaard's method, hence its stressintensity factor was obtained. To verify the derived results, blasting tests were made with concrete samples of 400mm×400mm×300mm, and all having, in the center, a drilled hole of 25mm in diameter and 200mm in height. The test result showed that the formulas derived are correct and effective.
In order to make the fracture cross-section of rock smooth in controlled cutting-blast, generally, two V-shape-notches on the inner wall of a shot hole are notched in symmetry along the design direction. A V-shape notch approximately be considered as V-shape-fracture under certain condition. This paper gave the complex stress function of preformed V-shape-fracture under a blasting load. The stress field and displacement field at the tip of a preformed V-shape-fracture were derived with Westergaard's method, hence its stressintensity factor was obtained. To verify the derived results, blasting tests were made with concrete samples of 400mm×400mm×300mm, and all having, in the center, a drilled hole of 25mm in diameter and 200mm in height. The test result showed that the formulas derived are correct and effective.
