GENERALIZED TWIN SHEAR STRESS YIELD CRITERION AND ITS GENERALIZATION 被引量：10

GENERALIZED TWIN SHEAR STRESS YIELD CRITERION AND ITS GENERALIZATION

导出

摘要 Ⅰ. INTRODUCTION The yield criterion or' materials under combined stresses is the important foundation for the research of constitutive law of materials, and widely used in the mechanics of solids, the strength of structures and the elasto-plastic analysis of structures. The three present

作者俞茂宏何丽南刘春阳

机构地区 Department of Civil Engineering

出处《Chinese Science Bulletin》 SCIE EI CAS 1992年第24期2085-2089,共5页

基金 Project supported by the National Natural Science Foundation of China

关键词 YIELD CRITERION TWIN SHEAR STRESS YIELD CRITERION GENERALIZED TWIN SHEAR STRESS YIELD CRITERION YIELD CRITERION TWIN SHEAR STRESS YIELD CRITERION GENERALIZED TWIN SHEAR STRESS YIELD CRITERION

分类号 N [自然科学总论]

引文网络
相关文献

同被引文献104

1HUANG WenXiong1?, REN QingWen1 & SUN DeAn2 1 Department of Engineering Mechanics, Hohai University, Nanjing 210098, China,2 Department of Civil Engineering, Shanghai University, Shanghai 200072, China.A study of mechanical behavior of rock-fill materials with reference to particle crushing[J].Science China(Technological Sciences),2007,50(z1):125-135. 被引量：6
2YAO Yangping,LU Dechun,ZHOU Annan,ZOU Bo.Generalized non-linear strength theory and transformed stress space[J].Science China(Technological Sciences),2004,47(6):691-709. 被引量：60
3杨强,解维华,孟松鹤,杜善义,李勇霞.复合材料多尺度分析方法与典型元件拉伸损伤模拟[J].复合材料学报,2015,32(3):617-624. 被引量：23
4俞茂宏,彭一江.强度理论百年总结[J].力学进展,2004,34(4):529-560. 被引量：116
5郭茶秀,魏新利,刘宏,李培宁.内压及扭矩载荷下无缺陷弯管的应力分析[J].机械强度,2002,24(3):391-393. 被引量：4
6赵德文,李桂范,刘凤丽.曲面积分求解椭圆模轴对称拔制[J].工程力学,1994,11(4):121-136. 被引量：7
7屈文忠.国产HTPB复合推进剂裂纹扩展特性的实验研究[J].推进技术,1994,15(6):88-92. 被引量：24
8俞茂宏.岩土类材料的统一强度理论及其应用[J].岩土工程学报,1994,16(2):1-10. 被引量：297
9谢英,万敏,韩非.板料成形极限应力图研究[J].机械工程学报,2005,41(7):45-49. 被引量：11
10黄风雷,王泽平,丁敬.复合固体推进剂动态断裂研究[J].兵工学报,1995,16(2):47-50. 被引量：13

引证文献10

1HaiBo Wang,Min Wan.Forming limit of sheet metals based on mixed hardening model[J].Science China(Technological Sciences),2009,52(5):1202-1211. 被引量：4
2赵德文,方琪,刘相华,王国栋.一个与Mises轨迹覆盖面积相等的线性屈服条件[J].东北大学学报（自然科学版）,2005,26(3):248-251. 被引量：2
3胡小荣,俞茂宏.材料三剪屈服准则研究[J].工程力学,2006,23(4):6-11. 被引量：22
4梁亚平,王惠珍,任兴民.基于统一强度理论S-D材料组合筒的弹塑性极限分析(英文)[J].中国科学技术大学学报,2008,38(4):364-368. 被引量：2
5梁亚平,任兴民,董文胜.无缺陷弯管的塑性极限载荷的统一解[J].机械科学与技术,2008,27(6):831-833. 被引量：1
6赵德文,李婧,刘相华,王国栋.Deduction of plastic work rate per unit volume for unified yield criterion and its application[J].中国有色金属学会会刊：英文版,2009,19(3):657-660. 被引量：2
7XIAO Yang,LIU HanLong,LIANG Robert Y.Modified Cam-Clay model incorporating unified nonlinear strength criterion[J].Science China(Technological Sciences),2011,54(4):805-810. 被引量：6
8陈国新,刘磊,苏枋.基于统一强度理论准则的内填生态砌块材料硬化函数探究[J].混凝土,2016(6):129-131. 被引量：2
9强洪夫,王稼祥,王哲君,王学仁,朱昭君.复合固体推进剂强度、损伤与断裂失效研究进展[J].火炸药学报,2023,46(7):561-588. 被引量：2
10赵德文,谢英杰,刘相华,王国栋.由Tresca和双剪应力两轨迹间误差三角形中线确定的屈服方程[J].东北大学学报（自然科学版）,2004,25(2):121-124. 被引量：11

二级引证文献54

1赵德文,方琪,刘相华,王国栋.一个与Mises轨迹覆盖面积相等的线性屈服条件[J].东北大学学报（自然科学版）,2005,26(3):248-251. 被引量：2
2王磊,赵德文,刘相华,王国栋.GM屈服准则求解锻压矩形坯[J].塑性工程学报,2006,13(6):1-4. 被引量：1
3赵德文,王根矶,刘相华,王国栋.Application of geometric midline yield criterion to analysis of three-dimensional forging[J].中国有色金属学会会刊：英文版,2008,18(1):46-51. 被引量：2
4陈丽红.基于三剪屈服准则的材料弹塑性统一本构方程[J].陕西理工学院学报（自然科学版）,2008,24(2):64-66. 被引量：7
5赵德文,邓伟,秦小梅,刘相华,王国栋.MY准则解析有外端的平锤头准三维锻造[J].材料科学与工艺,2009,17(4):453-456. 被引量：1
6WANG Gen-ji DU Hai-jun ZHAO De-wen LIU Xiang-hua WANG Guo-dong.Application of Geometric Midline Yield Criterion for Strip Drawing[J].Journal of Iron and Steel Research(International),2009,16(6):13-16. 被引量：1
7ZHAO De-wen FANG Qi LI Can-ming LIU Xiang-hua WANG Guo-dong.Derivation of Plastic Specific Work Rate for Equal Area Yield Criterion and Its Application to Rolling[J].Journal of Iron and Steel Research(International),2010,17(4):34-38. 被引量：4
8XIAO Yang,LIU HanLong,ZHU JunGao,SHI WeiCheng,LIU MengCheng.A 3D bounding surface model for rockfill materials[J].Science China(Technological Sciences),2011,54(11):2904-2915. 被引量：16
9章顺虎,赵德文,高彩茹.GM准则解析无缺陷弯管的塑性极限载荷[J].东北大学学报（自然科学版）,2011,32(11):1570-1573. 被引量：2
10胡小荣,樊晓梅.基于三剪统一强度准则的隧道围岩抗力系数计算[J].南昌大学学报（工科版）,2011,33(4):355-359. 被引量：5

1谭继锦.THE UNIFIED FORM FOR YIELD CRITERION OF METALLIC MATERIALS[J].Chinese Science Bulletin,1991,36(9):769-772.
2蓝远骐.A PROOF OF AN ASSERTION OF BLOKH AND ITS GENERALIZATION[J].Chinese Science Bulletin,1990,35(19):1666-1667.
3周新民,朱云鹤,陈建国.DISCOVERY OF ULTRAMAFIC ORBICULITE AND STUDY ON ITS GENESIS[J].Chinese Science Bulletin,1991,36(1):52-55.
4毛经中.THE GENERALIZATION OF BECKENBACH INEQUALITY AND MALFATTI INEQUALITY[J].Chinese Science Bulletin,1992,37(2):175-176.
5马巍,吴紫汪,常小晓,盛煜.Effects of the shear stress strength and the average normal stress on deformation of frozen soil[J].Progress in Natural Science:Materials International,1997,7(5):84-89.
6黄永念.GLOBAL ANALYTICAL STRUCTURE OF THE MANDELBROT SET AND ITS GENERALIZATION[J].Science China Mathematics,1992,35(2):175-185.
7DRASIN David.Picard’s theorem and the Rickman construction[J].Science China Mathematics,2010,53(3):523-532.
8王平义,方铎,吴持恭.Bedload transport in channel bends[J].Progress in Natural Science:Materials International,1995,5(1):101-107.
9孙晓明,徐克勤,任启江,REID R.KEAYS.DISCOVERY OF TWO DIFFERENT TYPES OF GOLD DEPOSITS IN THE JIAPIGOU GOLD MINE, JILIN PROVINCE, AND ITS UNIVERSALITY IN NORTH CHINA PLATFORM[J].Chinese Science Bulletin,1992,37(20):1721-1724.
10李松涛,王自强.GOVERNING EQUATION OF HRR-TYPE FIELDS FOR ORTHOTROPIC MATERIALS[J].Chinese Science Bulletin,1992,37(14):1167-1170.

Chinese Science Bulletin

1992年第24期

浏览历史

内容加载中请稍等...

GENERALIZED TWIN SHEAR STRESS YIELD CRITERION AND ITS GENERALIZATION 被引量：10

同被引文献104

引证文献10

二级引证文献54

相关作者

相关机构

相关主题

浏览历史