期刊文献+

Al-Cu-Mg-Ag合金析出相价电子结构与竞争析出的关系(英文) 被引量:4

Relationship Between the Valence Electron Structures and the Competition Precipitation of Al-Cu-Mg-Ag Alloys
原文传递
导出
摘要 基于固体与分子经验电子理论,计算了Al-Cu-Mg-Ag合金主要析出相θ'、S'和Ω的价电子结构与结构单元总成键能力,研究了析出相价电子结构、结构单元总成键能力与其竞争析出的关系。发现:θ′相的Fθ′值比Ω相的FΩ值大81.4%,S相的FS值比Ω相的FΩ值大0.2%,从析出相析出驱动力看,Ω相的析出驱动力远大于θ′相的析出驱动力,Ω相的析出驱动力与S相的析出驱动力相近,从析出相析出阻力的角度看,Ω相时效析出阻力小于S相的析出阻力。 Based on the EET theory,the valence electron structures and the total forming-bond ability F of the structure units of the main precipitated phases of Al-Cu-Mg-Ag alloys were calculated.The relationships between the valence electron structures,the total forming-bond ability F of the structure units and their competition precipitation behavior were studied.It is shown that Fθ′of θ′ phase is 81.4% bigger than FΩ of Ω phase,FS of S phase is 0.2% bigger than FΩ of Ω phase.From the precipitating driving of precipitated phases view,the precipitating driving of Ω phase is far bigger than that of θ′ phase,while it is close to that of S phase.From the precipitating obstruction view,the precipitating obstruction of Ω phase is smaller than that of S phase.
作者 刘伟东 屈华
机构地区 辽宁工业大学
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2013年第S2期574-577,共4页 Rare Metal Materials and Engineering
基金 The Science andTechnology Foundation of Liaoning Province(20031083) The Science and Technology Project of Education Department of Liaoning Province(LS2010082) The High School Distinguished Young Scholar Project of Liaoning Province(LJQ2011063)
关键词 AL-CU-MG-AG合金 脱溶相 价电子结构 脱溶惯序 Al-Cu-Mg-Ag alloys precipitated phase valence electron structure precipitated sequence
  • 相关文献

参考文献5

  • 1侯延辉,李光强,刘志义,樊希安.从电子结构和成键特性分析高Cu/Mg比Al-Cu-Mg-Ag合金强化机制[J].稀有金属材料与工程,2011,40(3):407-412. 被引量:10
  • 2V. V. Teleshov,E. Ya. Kaputkin,A. P. Golovleva,N. P. Kosmacheva.Temperature Ranges of Phase Transformations and Mechanical Properties of Alloys of the Al - Cu - Mg - Ag System with Various Cu/Mg Ratios[J].Metal Science and Heat Treatment (-).2005(3-4)
  • 3L.B Ber.Accelerated artificial ageing regimes of commercial aluminum alloys. I. Al–Cu–Mg alloys[J].Materials Science & Engineering A.2000(1)
  • 4S.P. Ringer,K. Hono.Microstructural Evolution and Age Hardening in Aluminium Alloys[J].Materials Characterization.1999(1)
  • 5O Beffort,C Solenthaler,P.J Uggowitzer,M.O Speidel.High toughness and high strength spray-deposited AlCuMgAg-base alloys for use at moderately elevated temperatures[J].Materials Science & Engineering A.1995(1)

二级参考文献3

共引文献9

同被引文献32

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部